■ ■ ■ ■
■ ■ ■ ■
19
Preventing Accidental Code
Changes
To prevent the accidental changing of codes in the
LITTLE EASY (for instance by young children), it is
possible to lock in the code you have set up:
Please remember, this is an optional feature and
should only be used after
you have found all the
code(s) which operate your device(s) correctly and
have set up your LITTLE EASY exactly the way you
want it.
To lock in your: Press:
TV code
VCR code
AUX code
* Hold down the MAGIC key until the red light
blinks twice. (The light will blink once and then
twice.)
To release the lock, simply repeat the same
steps.
Note: Once you have locked in a code, you will not
be able to enter a new code until the lock is released.
To Next Page
Loading...
