ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING
8 Programming Combo Device Control
CD Code:
Brand Name:_____________________
AUD Code:
Brand Name:_____________________
CBL Code:
Brand Name:_____________________
SAT Code:
Brand Name:_____________________
DVD Code:
Brand Name:_____________________
PVR Code:
Brand Name:_____________________
AUX1 Code:
Aux.1 Device Type:_________________
Brand Name:_____________________
AUX2 Code:
Aux.2 Device Type:_________________
Brand Name:_____________________
PROGRAMMING COMBO
DEVICE CONTROL
You can set the One For All 10L Universal
Remote Control with Learning (URC-10820
B00) to control your combo devices such as
TV/VCR, TV/DVD, Satellite/PVR/DVR,
Home-Theater-In-A-Box, and many others
with a single code. For a complete list of
combo devices, refer to the “Device Table”
on page 5.
NOTE: Some combo device types have codes
that you can program on separate device keys.
For example, you can program DVD Player/
VCR Combo codes under the VCR or DVD
mode keys. See “Setup Codes for DVD/VCR
Combos (Códigos de Configuración para
Aparatos Combinados DVD/
Videograbadora)” on page 58; note that there
are two sections under this device type.
Perform the following instructions to
control a TV/DVD Combo:
1. Turn on the TV/DVD Combo and insert
a video cassette.
NOTE: Please read steps 2 through 4
completely before proceeding. Highlight or
write down the codes and device you wish to
program before starting step 2.
2. On the remote control, press TV.
3. Press and hold SET until the LED (red
light) blinks twice, and then release
SET.
4. Use the Setup Codes under the TV/
DVD Combos heading (use codes listed
as “TV Codes”) on page 55. Locate the
brand name and then enter the first
four-digit code for your device. If
performed correctly, the LED will blink
twice.
OFA 10L with Learning Owners Manual.fm Page 8 Thursday, January 27, 2005 1:34 PM
To Next Page
Loading...
Need help?
General
