5
Key Charts
When the LED (red light) blinks,the remote control is
working and (after programming) is sending signals.
Press VCR/PVR, DVD, CBL/SAT,or TV once to select a
desired home entertainment device to control.
Also see the Device Table on page 6.
Press POWER once to turn on or off the selected device.
For master power control, see Programming
A Master Power Macro on page 10.
Use the keypad (1 ~ 9 and 0) to directly select channels
(e.g., 009 or 031).
Use TV/VID to switch the TV’s input to view TV or video
programs.
Press ENTER once after entering the channel numbers on
some TVs.
Use GUIDE to display your selected device’s program
guide or setup menu.
Press MENU once to display your selected device’s main
menu.
Use INFO to display the current channel and program or
on-screen directory.
Use EXIT to exit from your selected device’s guide or
menu.
Use the Cursor Keys to move the cursor in the program
guide and menu screens.
Use SELECT (OK) to choose options from your selected
device’s menu or guide.
Press LAST once to recall the last channel.
Use FAV to scan all channels, or after programming,
to scan up to 10 favorite channels.
Use CH▲ (or CH▼) to select the next higher (or lower)
channel.
Press SUBTITLE/CC once to display (or turn off) subtitles or
closed captions, if available on your DVD player or
cable/satellite service.
For a PVR (or DVR),press PVR MENU once to display a
list of your recorded shows.
Press MUTE once to turn the sound off or on.
Use VOL▲ (or VOL▼) to raise (or lower) the sound vol-
ume.
To Next Page
Loading...
Need help?
General
