Feature Function
CH
+
CH—
VOL VOL
M
REC
ENTER TV/VCR
MENU —
PREV CH
FAV CH
MENU
L
MENU
R
PAUSE
SETUP POWER
TVCBL/SAT
VCR/LD
AUDIO 2AUDIO 1
MENU
MENU +
SLEEP
AUDIO
PLAY
REW FF
STOP
S
E
L
E
C
T
The Red Light (LED) flashes red to show that
the remote is working.
The SETUP key is used to program your
One
For All
®
Easy 5
.
The Glow Keys: VOL +/- (Volume Up/
Down), CH +/- (Channel Up/Down), M
(Mute), POWER, TV/VCR,ENTER and the
Digit Keys (0-9) operate the same as on
your original remote. These keys are
made of a phosphorescent material that
Glows-in-the-dark. To activate the “Glow”
Feature, you must expose the Glow Keys
to bright light. The length of time the
Glow Keys remain illuminated will be
determined by the length of time the
remote is exposed to bright light.
The TV, VCR/LD,CBL/SAT,AUDIO 1,and
AUDIO 2 keys are used to select the home
entertainment component you want to
control.
The SLEEP key allows you to access the
sleep timer of your TV or Cable Box. If your
original TV or Cable Box remote control did
not have a SLEEP function, your
One For All
®
Easy 5
will automatically access its own
built-in sleep timer.
The AUDIO key allows you to turn "ON" the
audio components that are programmed
to the AUDIO 1 and AUDIO 2 keys with one
keystroke. This feature is set up as soon as
you program the AUDIO 1 and AUDIO 2
keys.
The MENU key operates the same as the
MENU or OSD (On Screen Display) key on
your original remote. When you press the
MENU key, your
One For All
®
5 Remote
Control enters the menu mode and
enables
the CH +/- and VOL +/- keys to
navigate through your menu. Pressing one
of the device keys will exit the remote
control’s menu mode and revert CH +/-
and VOL +/- to their original functions. If
your original remote control had a SELECT
key, for use in your menu, try M (Mute) or
ENTER. Please consult the original owners
manual of your home entertainment
component for more detailed instructions
on accessing and navigating your on-
screen menus.
The FAV CH (Favorite Channel) key allows
you to program your
One For All
®
Easy 5
with up to 10 of your favorite channels.
The PREV CH (Previous Channel) key
operates the same as the LAST CHANNEL
or RECALL key on your original remote.
The REC (Record), PAUSE,REW (Rewind),
PLAY,FF (Fast Forward) and STOP keys
operate the same as the keys on your
original VCR and CD Player remote. As a
safety feature on the
One For All
®
Easy 5
,
you must press the REC key twice.
SETUP
Features and Functions
The illustration below and chart immediately to
the right describe the features and functions of
the
One For All
®
Easy 5
universal remote control.
Use the drawing to locate each key on the
remote, then refer to the chart for a description of
the corresponding function each key performs.
Overview
The illustration below and the chart immediately
after describe the features and functions of the
One For All
®
Easy 5
universal remote control. Use
the drawing to locate each key on the remote,
then refer to the chart for a description of the
corresponding function each key performs.
MENU
Programming the
One For All
®
Easy 5
to operate your TV:
Locate the brand name of your TV and then write it in
the space below.
TV Brand: _____________________________________________
Locate the brand name of your TV in the “SETUP CODES
FOR TVs” section. The brands are listed in alphabetical
order with the most popular codes listed first. You will
use one of these codes to program your
One For All
®
Easy 5
to operate your TV.
To program the One For All Easy 5 to operate your TV:
1 Turn on your TV.
2 Press TV and release. Press and hold SETUP
until the
One For All
®
Easy 5’s
red light blinks
twice, then release SETUP.
3 Enter the first three-digit TV code listed for your
brand in the “Looking Up Set-Up Codes for TVs”
section. If you perform this procedure
correctly, the red light will blink twice when you
enter the final digit of your code.
4 Aim the
One For All
®
Easy 5
at your TV and
press POWER. Your TV should turn off. If your TV
does not respond, repeat Steps 2-4, trying
each code listed for your brand until you find
the one that operates your TV.
5 Your
One For All
®
Easy 5
is now programmed
to operate your TV. Write your TV code in the
boxes to the left for future reference.
Remember, if you want to use your
One For All
®
Easy 5
to
operate your TV, press the TV key first.
POWER
TV SETUP
Setting Up Your Components
FAV CH
PREV CH
STOP
REW
PLAY
FF
Installing the Batteries
Your
One For All
®
Easy 5
requires four (4) new AAA alkaline
batteries. To install the batteries:
On the back of the
One For All
®
Easy 5
,
push down on the tab and lift the battery
cover off.
Match the + and - marks on the batteries to
the + and - marks in the battery case, then
insert the batteries.
Press the battery cover back into place.
Test the unit by pressing POWER. If the
batteries are inserted correctly, the red light
(LED) will blink once.
NOTE: Your
One For All
®
Easy 5
includes an unlimited memory
backup, removing the batteries will not require you to
reprogram your remote.
1
2
3
4
TV VCR/LD
CBL/SAT
AUDIO 1 AUDIO 2
POWER
M
S
E
L
E
C
T
VOL
VOL
CH
+
CH
_
SLEEP
AUDIO
0-9
0
AUDIO 1 AUDIO 2
DO NOT USE the MENU- key on your
One For All
®
Easy 5
remote control with TVs manufac-
tured by Mitsubishi in 1996 or 1997, or on any TV manufactured in 1996 or 1997 using TV code
150. In 1996, Mitsubishi changed the frequency used to operate the menu down feature on
these TVs. Consequently, using the MENU- key on your
One For All
®
Easy 5 remote control
with
these Mitsubishi TVs or with TVs using TV Code 150 will put your TV in a service mode. Universal
Electronics Inc. assumes no responsibility for this change in the manufacturer’s design or for
any damage to your TV or any other damages that you incur as a result of these changes.
Attention Consumers
STOP
Set-Up Codes for
TVs
A-Mark 003
Admiral 093, 016, 180, 165,
179
Adventura 046
Aiko 092
Akai 030, 056, 145, 151
Alleron 179
Ambassador 177
Amstrad 171, 177
Anam 180
Anam
National 055
AOC 030, 019, 185, 137,
003, 180, 056
Archer 003
Audiovox 180, 003
Belcor 019, 030
Bell &
Howell 016, 154, 179, 180
Blue Star 282
BPL 282
Bradford 180
Brockwood 019
Broksonic 236, 463, 003, 180
Candle 030, 056, 186, 046
Carver 054, 187
Celebrity 000
Citizen 092, 060, 030, 056,
280, 186, 046, 039
Clairtone 185
Concerto 056
Contec 180, 185
Craig 180
Crown 180, 039
Curtis Mathes 047,
060, 054, 154, 030,
039
CXC 180
Daewoo 451, 092, 019, 039
Daytron 019, 056, 092
Dumont 017, 019
Electroband 000, 185
Electrohome 150, 056, 000, 154,
185, 039
Emerson 463, 236, 180, 177,
179, 280, 178, 282,
154, 019, 039, 185
Envision 030
Finlux 179
Fisher 154, 159
Fujitsu 179
Funai 171, 179, 180
Futuretech 180
GE 047, 451, 051, 021,
027, 282, 178, 135,
174
Gibralter 019, 030, 017
Goldstar 060, 056, 030, 019,
178
Goodmans 179
Granada 145, 151, 178
Grandin 282, 180
Grunpy 179, 180
Hallmark 178, 179, 236, 019
Harvard 180, 236, 178, 179
HCM 282
Hinari 179
Hisawa 282
Hitachi 151, 145, 056
POWER
STOP
SEE
BELOW
TV/VCR
ENTER
REC
PAUSE
User Guide
URC 5065
Easy 5
To Next Page
Need help?
General
