To program the One For All Easy 5 to operate your
Receiver/Amplifier/Tuner:
1 Turn on your Receiver/Amplifier/Tuner.
2 Press AUDIO 2 and release. Press and hold
SETUP until the
One For All
®
Easy 5’s
red light
blinks twice, then release SETUP.
3 Enter the first three-digit Receiver/Amplifier/
Tuner code listed for your brand in the “Set-Up
Codes for Receivers/Tuners” or “Set-Up Codes
for Amplifiers” section. If you perform this
procedure correctly, the red light will blink
twice when you enter the final digit of your
code.
4 Aim the
One For All
®
Easy 5
at your Receiver/
Amplifier/Tuner and press POWER. Your
Receiver/Amplifier/Tuner should turn off. If your
Receiver/Amplifier/Tuner does not respond,
repeat Steps 2-4, trying each code listed for
your brand until you find the one that operates
your Receiver/Amplifier/Tuner.
5 Your
One For All
®
Easy 5
is now programmed to
operate your Receiver/Amplifier/Tuner. Write
your Receiver/Amplifier/Tuner code in the
boxes to the left for future reference.
Remember, if you want to use your
One For All
®
Easy 5
to
operate your Receiver/Amplifier/Tuner, press the AUDIO 2
key first.
Programming the
One For All
®
Easy 5
to operate your
Cable Converter or Satellite:
Locate the brand name of your Cable Converter or
Satellite and then write it in the space below.
Cable or Satellite Brand: ______________________________
Locate the brand name of your Cable Converter or
Satellite in the “SETUP CODES FOR CABLE CONVERTERS” or
“SETUP CODES FOR SATELLITES” section. The brands are
listed in alphabetical order with the most popular codes
listed first. You will use one of these codes to program
your One For All Easy 5 to operate your Cable
Converter or Satellite.
To program the One For All Easy 5 to operate your Cable
Converter or Satellite:
1 Turn on your Cable Converter or Satellite.
2 Press CBL/SAT and release. Press and hold
SETUP until the
One For All
®
Easy 5’s
red light
blinks twice, then release SETUP.
3 Enter the first three-digit Cable Converter or
Satellite listed for your brand in the “Set-Up
Codes for Cable Converters” or “Set-Up Codes
for Satellites” section. If you perform this
procedure correctly, the red light will blink
twice when you enter the final digit of your
code.
4 Aim the
One For All
®
Easy 5
at your Cable
Converter or Satellite and press POWER. Your
Cable Converter or Satellite should turn off. If
your Cable Converter or Satellite does not
respond, repeat Steps 2-4, trying each code
listed for your brand until you find the one that
operates your Cable Converter or Satellite.
5 Your
One For All
®
Easy 5
is now programmed to
operate your Cable Converter or Satellite.
Write your Cable Converter or Satellite code in
the boxes to the left for future reference.
NOTE: If your original Cable Converter remote control did
not have an “ON” key, press CH+ on the
One For All
®
Easy 5
to turn your Cable Converter ON.
Remember, if you want to use your
One For All
®
Easy 5
to operate your Cable Converter or Satellite, press the
CBL/SAT key first.
Set-Up Codes for
Cable Converters
ABC 003, 014, 007, 008,
011, 017,
001, 013
Antronix 022
Archer 153, 022
Belcor 056
Cable Star 056
Cabletenna 022
Cableview 022
Century 153, 618
Citizen 153, 315
Colour
Voice 025
Contec 019
Dae Ryung 008
Eagle Com-
tronics 040, 008
Eastern 002
Everquest 015
Funai 153
Garrard 153
GC
Electronics 056
Gemini 015
General
Instrument 476, 011, 003, 014
Goldstar 144, 040, 533
Hamlin 259, 020, 009, 034
Hitachi 001
Hytex 007
Jasco 153, 315
Jerrold 003, 014, 476, 012,
011, 015
Memorex 525
Movie Time 063, 015
Novaplex 618
Novavision 008, 017, 477
NSC 063, 156
Oak 019, 007
Omega 015
Panasonic 107, 021, 525
Paragon 525
Philips 153, 025
Pioneer 533, 144
Popular
Mechanics 400
Pulsar 525, 040
RCA 021
Regal 259, 020
Regency 002, 020
Rembrandt 011, 153
Runco 525
Samsung 144, 040, 533
Scientific
Atlanta 008, 477, 017
Sigma 019
Signal 015, 040
Signature 011
SL Marx 040
Sprucer 021
Starcom 003, 015
Stargate 015, 040
Starquest 015
Sylvania 001
Tandy 258
Teleview 040, 063
Texscan 001
Tocom 012, 013
Toshiba 525
Tusa 015
TV 86 063, 040
Unika 153, 022
United
Artists 007
United
Cable 003
Universal 153, 056, 022
Videoway 250, 525
Viewstar 063, 258
Walmart 400
Zenith 525
Zentek 400
Set-Up Codes for
Satellites
Channel
Master 018
Chaparral 053
Citoh 164
Drake 018, 064
Echostar 280, 269
General
Instrument 627, 050, 038, 361
Home
Cable 238
IQ Prism 210
Janeil 152
Jerrold 627
Macom 050, 018
Memorex 269
Panasonic 152
Primestar 627
RCA DSS 566
Realistic 052
Sony DBS 639
Star Trak 180, 547
STS 210
Toshiba 082
Uniden 052, 074, 076, 238
US
Electronics 547
Zenith 064
Programming the
One For All
®
Easy 5
to operate your CD
Player:
Locate the brand name of your CD Player and then write
it in the space below.
CD Player Brand: ______________________________________
Locate the brand name of your CD Player in the “SETUP
CODES FOR CD PLAYERS” section. The brands are listed in
alphabetical order with the most popular codes listed
first. You will use one of these codes to program your One
For All Easy 5 to operate your CD Player.
To program the One For All Easy 5 to operate your CD
Player:
1 Turn on your CD Player and insert a compact
disc.
2 Press AUDIO 1 and release. Press and hold
SETUP until the
One For All
®
Easy 5’s
red light
blinks twice, then release SETUP.
3 Enter the first three-digit CD Player code listed
for your brand in the “Set-Up Codes for CD
Players” section. If you perform this procedure
correctly, the red light will blink twice when you
enter the final digit of your code.
4 Aim the
One For All
®
Easy 5
at your CD Player
and press PLAY. Your CD Player should play
your disc. If your CD Player does not respond,
repeat Steps 2-4, trying each code listed for
your brand until you find the one that operates
your CD Player.
5 Your
One For All
®
Easy 5
is now programmed to
operate your CD Player. Write your CD Player
code in the boxes to the left for future
reference.
Remember, if you want to use your
One For All
®
Easy 5
to
operate your CD Player, press the AUDIO 1 key first.
Set-Up Codes for
CD Players
Aiwa 124, 157
California
Audio Lab 029
Carver 157, 179
Denon 003
DKK 000
Emerson 305
Fisher 048, 179, 088
Garrard 393
Genexxa 032, 305
Goodmans 305
Grundig 157
Hitachi 032
JVC 072
Kenwood 028, 037, 048,
190
Krell 157
LXI 305
Magnavox 157
Marantz 157, 029
Matsui 157
MCS 029
Memorex 032, 305
Mission 157
NAD 000
NSM 157
Onkyo 101
Optimus 032, 000, 468,
179, 037,
305
Panasonic 029
Philips 157
Pioneer 032, 468
Proton 157
QED 157
Quasar 029
RCA 053
Realistic 179
Rotel 157
SAE 157
Sansui 157, 305
Sanyo 179
Scott 305
Sears 305
Sharp 037
Sony 000, 185, 397,
490, 604,
605
Soundesign 145
TEAC 393
Technics 029, 303
Victor 072
Yamaha 036, 187
To program your
One For All
®
Easy 5
to operate your
Receiver/Amplifier/Tuner:
Locate the brand name of your Receiver/Amplifier/Tuner
and then write it in the space
below.
Receiver/Amplifier/Tuner Brand: _______________________
Locate the brand name of your Receiver/Amplifier/Tuner
in the “SETUP CODES FOR RECEIVERS/AMPLIFIERS/TUNERS”
section. The brands are listed in alphabetical order with
the most popular codes listed first. You will use one of
these codes to program your One For All Easy 5 to
operate your Receiver/Amplifier/Tuner.
Set-Up Codes for
Receivers/Tuners
Aiwa 121, 158, 189
Carver 189, 008
Casio 195
Clarinette 195
Denon 004
Fisher 042
Garrard 463
Grundig 189
JVC 074
Kenwood 027, 077, 186
Lloyd’s 195
Magnavox 189, 195
Marantz 189, 039
Matsui 195
MCS 039
Memorex 014
Modulaire 195
NAD 320
Onkyo 135
Optimus 014, 080, 186
Panasonic 039, 309
Penney 195
Philips 189
Pioneer 014, 080
Quasar 039
Realistic 195
Sansui 189
Sharp 186
Sherwood 502
Sony 158
TEAC 463
Technics 039, 309
Victor 074
Wards 014, 189, 158,
042, 080
Yamaha 176, 186, 082
Yorx 195
Set-Up Codes for
Amplifiers
Carver 269
Denon 160
Genexxa 395
Grundig 269
Luxman 165
Magnavox 269
Marantz 269, 321
Nakamichi 321
Optimus 300, 013, 395
Panasonic 308
Philips 269
Pioneer 300, 013
Realistic 395
Sansui 321
Soundesign 211
Technics 308
Wards 013, 211
Yamaha 133, 354
There may be additional home entertainment or home
automation components that you want to control with
your
One For All
®
Easy 5
which do not have their own
designated device keys. The following components can
be set up under these device keys.
Home Entertainment Key to Program
Component
Miscellaneous Audio AUDIO 1
Audio Cassette Decks VCR/LD
Video Accessories CBL/SAT
To set up your additional components, simply follow the
programming instructions for Steps 2 and 3 in the “Setting
Up Your Components” section for the device key you are
programming.
Setting Up Additional Components
CBL/SAT
SETUP
POWER
AUDIO 1
SETUP
AUDIO 2
SETUP
PLAY
POWER
Set-Up Codes for
Miscellaneous
Audio
Aiwa 159, 010
Fisher 052
Jerrold 520, 459
JVC 073
Scientific
Atlanta 460
Sony 159, 010
Starcom 459
Set-Up Codes for
Audio Cassette
Decks
Aiwa 197
Carver 029
Denon 076
Garrard 308, 309
JVC 273, 274
Kenwood 070, 071
Magnavox 029
Marantz 029
Onkyo 136
Optimus 027, 220
Philips 029
Pioneer 027, 220
Sansui 029
Sony 170, 243, 291
TEAC 308, 309
Technics 229
Victor 273, 274
Wards 027
Yamaha 094, 097
Set-Up Codes
for Video
Accessories
Rabbit 081
TeleCaption 171
To Next Page
Loading...
