INSTALLING BATTERIES
1. On the remote control’s back,push the tab
and lift off the battery cover.
2. Obtain two (2) new AA alkaline batteries.
Match the + and – marks on the batteries
to the + and – marks in the battery case,
then insert the new batteries.
3. Press the battery cover back into place.
The tab should click when the cover is
locked.
4. Test the remote control by pressing
any mode key (e.g.,
TV).If the batteries are
inserted correctly,the
LED (red light) will
blink once.
NOTE:When batteries need replacement,the remote control
will stop operating. Remove the old batteries and insert new
ones within 10 minutes to ensure all of your programming
information is restored.
8
To Next Page
Loading...
