EasyManua.ls Logo

One for All URC-7510 - Key Magic Function Programming; Troubleshooting and Support; Helpful Hints for Common Problems

One for All URC-7510
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WWW.ONEFORALL.COM 11
Key Magic
®
Key Magic is an exclusive ONE FOR ALL feature. This feature ensures
that many functions of your original remote control can be operated.
Often used functions can be assigned to a key of your choice using the
Key Magic feature of your ONE FOR ALL TV remote.
To program a certain function with Key Magic we need the
following information regarding your device:
Example: Your TV:
BRAND : Philips
SET-UP CODE* : 0556
FUNCTION : Install
FUNCTION CODE**: 618
* To obtain the SET-UP CODE please follow the blink back
procedure on page 8.
** You can request your FUNCTION CODE through our customer
service via the help-line, e-mail, fax or letter.
Once you have obtained your FUNCTION CODE from customer
service, programming the function code is easy:
1 Press and hold the MAGIC key until the red light blinks twice
(the red light will blink once, then twice).
2 Press 9 9 4. The red light will blink twice.
3 Press and release the MAGIC key once.
4 Enter the FUNCTION CODE (provided by customer service).
5 Press the spare key you want this function programmed on.
The red light will blink twice.
Helpful Hints
Important notes:
- Key Magic can be assigned to any key except for the (0 - 9) keys and
MAGIC key.
- Please note all the FUNCTION CODES you obtain from customer
service for easy future reference.
- To reset a certain key to its original function just repeat steps 1 and 2, then
press the key that you want to reset twice.
Problem:
Your brand is not listed in the
barcode list ?
The ONE FOR ALL TV remote
is not performing commands
properly ?
Problems changing channels ?
The ONE FOR ALL TV remote
does not respond after
pressing a key ?
The red light does not blink
when you press a key ?
Solution:
Try the search method on page 8.
You may be using the wrong SET-UP
CODE. Try the search method on
page 8.
Enter the channel number exactly as
you would on your original remote.
Make sure you are using fresh new
“AA/LR6” alkaline batteries and are
aiming the ONE FOR ALL TV remote at
your device.
Replace batteries with 2 fresh, new
“AA/LR6” alkaline batteries.
Trouble Shooting

Related product manuals