24
Using the AUX Key
The AUX key on your ONE FOR ALL 3 can be used to control a
second Television or Video Recorder.
To set up the AUX key to control a second TV:
Press and hold down the MAGIC key
until the red light blinks twice (the light
will blink once, then twice).
Press 9 9 2 TV AUX. The LED will blink
twice.
Find your Television code in the Set-Up
Code section (starting on page 11). Codes
are listed by brand name. The most
popular code is listed first. Make sure
your Television is switched on.
Press and release your ONE FOR ALL 3’s
AUX key, then press and hold down
the MAGIC key until the ONE FOR ALL
3's red light blinks twice.
Enter your four-digit TV code using the
number keys. The red light will blink
twice.
Now, aim your ONE FOR ALL 3 at your
Television and press POWER. If your
Television switches off, your ONE FOR
ALL 3 is ready to run your Television.
When you want to control your second
TV, press AUX first.
Make sure you write down your code in the boxes provided
inside the battery compartment and on page 10 for easy
future reference.
Advanced Features
Important note: To set up a second Video Recorder, follow the
same instructions above, only press the VCR key instead of the TV
key during step 2.
To Next Page
Loading...
