WWW.ONEFORA LL.COM 15
Shifted Macros
You can install a Shifted Macro on any key, except for the device
k
eys (TV, VCR, SAT, DVD and AMP), the MAGIC key, and the
N
UMBER keys.
I
f for example, you want to program a shifted Macro on the POWER key,
simply press MAGIC once then the POWER key during step 3.
N
ow everytime you press MAGIC, then the POWER key, the ONE FOR ALL
w
ill turn off your TV, VCR and Satellite.
• To erase the Shifted Macro from the POWER key press:
M
AGIC* 9 9 5 MAGIC POWER key MAGIC*
* Here you must hold down MAGIC until the device key blinks twice.
- Each MACRO can consist of a maximum of 15 key strokes.
-
Make sure that you program a Macro on a spare key that you don’t use
in any mode.
-
Once you program a Macro on a specific key, the sequence will work regardless
of the mode (TV, VCR, SAT, DVD and AMP) you are using.
-
To avoid accidental recordings with the ONE FOR ALL 5, you must press
the Record key twice to begin recording. Because of this, you cannot assign a
M
acro or Shifted Macro to the Record key.
- If you had to hold down a key for a few seconds on the original remote control
to get a function, this function may not work in a macro on your ONE FOR ALL
remote.
- If you program a Macro on a key, the original function will become shifted
(excluding CH+/- and VOL+/- keys). Press MAGIC then the key to access it. If you
place a Macro shifted on a digit key, access the original function by pressing
MAGIC twice and then the digit key.
- If a Shifted Macro is placed on the Channel and Volume keys then the Colour
and Brightness feature will be sacrificed.
Extra Features
To Next Page
Loading...
