One products OTB02 User Manual

Warnings
- Do not use rough textured cleaning tools or highly corrosive
cleaners when cleaning your LED Lights. These tools and
chemicals will damage the product. ONLY use a soft damp
cloth and non corrosive cleaners.
- Do not scratch the LED strips or use sharp objects on them.
- Do not permanently bend, twist, or screw through the LED
strips as this will damage the LED’s internal components.
- Do Not pull or snap with excessive force, this will damage
the product.- If the product is damaged or wires are frayed
or damaged, do not use the product. If your product arrived
in this condition, contact us for a replacement.
- Recommended temperature is between 10°F to 120°F. Do
not use in extreme heat or cold.
- Once the product has come to the end of its life please
recycle the components. Ask your local retailer for proper
disposal methods.
Packaging Contains
- 1 Piece 70cm USB cable
- 1 Piece 24 key remote controller
- 3 Pieces 4-pin connection cables
- 6-pieces 4-pin connectors
- 4 piece 50 cm strip light, 30 LED per piece, 5v,
p65 waterproof 5050 RGB LED Strips
- 1 - - 2 - - 3 -
1. Clean the surface of residue and dust
3. Place the LED strips in the location you desire, pressing
rmly and sliding your nger along the strip to ensure a
secure attachment.
Installation Steps
2. Remove the protective lm covering the adhesive backing
on your LED Strips
*IF the strips are not connected properly they will not work or appear dull.
Before beginning, look at your strips orientation. For correct
connectionmake sure to line-up the “+” to “+” between
strips and “->” to “+” whenusing the connection cables.
See below for example:
Installation and User Manual
+1 (310)-645-6400
www.one-products.com
Promounts
20218 Hamilton Ave,
Torrance CA 90502
OTB02

One products OTB02 Specifications

General

Brand	One products
Model	OTB02
Category	TV Accessories
Language	English

Summary

Product Warnings and Usage

Safe Handling and Cleaning

Instructions on cleaning, avoiding sharp objects, bending, twisting, and forceful handling of LED strips.

LED Strip Installation Guide

Surface Preparation

Clean the surface to remove dust and residue for secure attachment.

Adhesive Backing Application

Remove the protective film from the LED strip's adhesive backing.

Securing LED Strips

Press firmly and slide along the strip to ensure a secure attachment to the desired location.

Power Connection

Connect the USB plug to any available USB port or a USB to outlet adapter.

Remote Control Operation

Use the IR Remote Control to select favorite colors and settings.

Product Specifications

LED Strip Details

Specifications include LED type, color, quantity, voltage, waterproof class, and strip length.

Controller Specifications

Details on working temperature, voltage supply, output circuits, dimensions, and power consumption.

Remote Control Functions

Key Functions Overview

Explanation of remote keys for power, speed/brightness adjustment, and static color selection.

Dynamic Mode Functions

Descriptions of Flash, Strobe, Fade, and Smooth modes for dynamic lighting effects.