EasyManua.ls Logo

One Touch Y280 - Driver Installation Issues; LED Indicator Status; SIM;USIM Network Registration; Connection Profile Prompt

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
3. Q: I cannot install the driver automatically.
A: Find the AutoRun.exe file in modems root and double-click it to run.
4. Q: Why the LED indicator of device is always in solid red?
A: The status for solid red LED indicator may be:
1. No service;
2. No SIM card;
3. SIM Error
You may need:
1. Check network signal;
2. Insert a SIM card;
3. Check SIM card status.
5. Q: The SIM/USIM card does not register any networks
A: The reasons are shown below:
1. Unstable local signal;
2. The software is an old version;
3. Hardware problem.
You may:
1. Try to logon from another location;
2. Update the software;
3. Check the hardware or use another data card and retry.
6. Q: Why does the prompt “No available connection profile. Please set an
available default one in connection profile” appear?
A: Please add a connection profile manually.
7. Q: It failed to connect to the internet
A: Please make sure the connection profile and settings are correct.
8. Q: The connection speed and data transfer rates are too slow
A: Please check the local network signal strength.
9. Q: Sending an SMS failed
A: Please make sure the SMS center number is correct.
10. Q: I cannot receive an SMS
A: Please check whether your SIM/USIM card’s memory is full.