Do you have a question about the One Touch Y280 and is the answer not in the manual?
| Wi-Fi Standards | 802.11b/g/n |
|---|---|
| SIM Card Slot | Yes |
| Frequency Band | 2.4 GHz |
| Antenna | Internal |
| Wireless Standards | 802.11b/g/n |
| Maximum Data Rate | 150 Mbps |
| Security | WEP, WPA, WPA2 |
Provides steps to access the web interface using a browser and default credentials.
Explains the meaning of various icons displayed on the device interface.
Details on displaying current network connection, WAN status, and usage data.
Guides on managing connection profiles, including adding, editing, deleting, and setting defaults.
Instructions for selecting and configuring network modes and network selection.
Procedures for enabling, disabling, and changing the device's PIN code.
Configuration options for the device's dial mode, including auto connect in roaming.
Covers reading, sending, forwarding, replying, and deleting SMS messages, plus settings.
Procedure to change the language displayed on the web UI.
Options for rebooting the device or resetting it to factory default settings.
Lists the web browsers compatible with the device.
Lists the operating systems compatible with the device software.
Troubleshooting steps for automatic driver installation failures.
Explains the meaning of a solid red LED indicator and related checks.
Reasons for SIM/USIM card not registering networks and troubleshooting steps.
Guidance on resolving the 'No available connection profile' prompt.
Troubleshooting steps for failing to connect to the internet.
Advice on addressing slow connection speed and data transfer rates.
Troubleshooting for failed SMS sending, including checking the SMS center number.
Steps to resolve inability to receive SMS, checking SIM card memory.
Information on whether the device supports roaming and how to check.
Details on the product meeting national SAR limits and RF exposure requirements.
Explains international guidelines for exposure to radio waves and SAR limits.
Presents the maximum SAR values recorded for the model under specific conditions.