14
Getting Started
Speaker Connections
• Always connect the speakers before connceting the power supply.
• Connect the black wire of to the terminal marked „L“ on the rear of the main united.
• Connect the red wire to the terminal marked „R“ on the rear of the main united.
AUX Connection
• Use a 3,5mm male to male line-in cable to connect line out or headphone out jack of an
audio device to the AUX Line In Jack.
Mains Connection
• This unit will operate an AC-DC adaptor with DC 5,8V 1A output
• Insert the DC plug of the ACDC adaptor into DC jack on left side of unit.
• Plug the acdc adaptor into a convenient standard 100-240V50-60Hz wall outlet
Operation
CD-Player
• Press STANDBY to switch the device on.
• Pres OPEN to open the CD tray. Insert a CD with the printed side facing up. Close the lid.
• Press FUNCTION repeatedly to select the CD mode.
• Use the conveniet buttons , , and to operate.
Repeat / Random
• During playback, press the PROGRAM/PLAY button on unit or remote control repeatedly to
select the following repeat options: Repeat, Repeat all, Intro, Random Play.
• Repeat: Repeat current track.
• Repeat all: Repeat all tracks on the CD.
• Repeat folder: Repeat the current folder (MP3 CDs only).
• Random: the unit will be shue all the tracks in the CD and will play in random order.
To Next Page
Loading...
