EasyManua.ls Logo

oneConcept Vertical 90 - Saving Radio Stations; AUX IN; USB; SD; Clock;Display

oneConcept Vertical 90
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Saving radio stations
Press PROGRAM/PLAY-MODE on the unit
Press FOLDER UP or FOLDER DOWN to select a memory channel for the current radio
station.
Press PREVIOS or NEXT to select your desired station
Press PROGRAM/PLAY MODE button to conrm it
To cycle through saved radio stations, press the FOLDER UP or FOLDER DOWN button..
AUX IN
AUX mode allows you to play any audio device (MP3, cassette player, ect.) through your unit.
Use a 3,5mm male to male line-in cable to connect line out or headphone out jack of an
audio device to the AUX Line In Jack
Press FUNCTION button to the AUX mode.
Start playback on the external audio device.
You must use the external audio device to control playback. To avoid distortion, do not set
the volume from the external audio device to very high levels.
USB / SD
Press FUNCTION button to select USB/SD mode.
Connect a USB drive containing MP3 les to the USB port.
Use , , and to navigate through your music library. Use the FOLDER + or FOL-
DER – buttons to skip folders.
Clock/Display
Place the player in standby mode (press STANDBY if the player is currently on). The time
will be displayed when the player is in standby.
Press PROGRAM/PLAY MODE to enter setup mode.
12H/24H setting will ash. Press PREVIOUS or NEXT to change the setting.
12H: Display the time in 12-hour time
24H: Display the time in 12-hour time
Press PROGRAM/PLAY MODE the hour setting will ash.
PREVIOUS or NEXT to change the setting.
Press PROGRAM/PLAY MODE the minutes setting will ash.
PREVIOUS or NEXT to change the setting.
Press PROGRAM/PLAY MODE once more to save your changes.

Related product manuals