04
5. Take out 4 metal posts and insert
them into four holes at the bottom of
the machine.
7. Turn the machine over after all is
installed. Place the desiccant bag
into the desiccant box.
6. Align the 2 holes at the bottom of the
bowl holder with 2 metal posts and
install them properly. Do the same on
the other side.
8. Fill the tank with pet dry food. Place
the stainless steel bowls and connect
the charging cord to power supply.
Tips:
1. The batteries keep the feeder work under blackout.
2. Please use the attached 5V/1A adapter in daily.
Note:
Kibble size allowed: 4-12mm/0.2-0.5
inch in diameter.
Do not use for canned or wet food.
To Next Page
Loading...
