OnePlus Watch - Weather Information Display; Setting and Managing Alarms

2.6 Weather
The watch can display weather information for your current location.
Mode 1: weather face
Switch the watch to the face supporting weather display. Then, latest weather information will
be displayed on the screen.
Mode 2: weather card
On any function watch face interface (not the main watch face), long press any position of the
watch face to go to the function watch face selection page. Slide left to add the weather card,
and the screen will display your location, weather, temperature and other information.
Mode 3: Weather App
Tap the Up key to go to the app list, and select Weather. The screen will display your location,
weather, temperature and other information.
Notes
 The health App needs to be connected for the availability of the weather function. In
addition, make sure that GPS is enabled on the mobile phone and the health App is granted
the “Allow all the time” permission over the location information.
 The weather information displayed on the watch is obtained and pushed by the health App
from the service provider. Due to the difference from the weather service provider used
by the mobile phone system, the results displayed may be slightly different.
2.7 Alarm Clock
1. Tap the Up key to go to the app list, select Alarm clock and tap Add.
2. Set the time of the alarm clock, tap OK, select the repetition period, and tap OK to complete
the alarm clock settings.
3. Tap the set alarm clock to edit, modify or delete it.
4. When the alarm clock rings and the watch vibrates, tap Snooze or tap the Up or Down key
to delay the reminder (delay by 10 min). Tap Close to turn off the alarm directly.
Notes
 Tap the Up key to go to the app list, select Settings > Sound and vibration, and
enable Smart wake-up alarm. After enabling, the watch will provide appropriate
vibration wake-up according to your sleep state, making you feel more comfortable when
you are woken up.
 If no repetition period is set for an alarm clock, the alarm clock takes effect only once by
default.
 Up to six alarm clocks can be added.
 If no operation is performed within 60s after an alarm clock rings, the alarm clock will be
delayed for reminding and it can be delayed five times at most.
 On the watch face interface, slide down to open the shortcut menu. Tap Alarm clock to
quickly enable the alarm clock function.