2.8 Timer
1. Tap the Up key to go to the app list and tap Timer. By default, the watch provides you with
6 countdown timers: 1 min, 2 min, 3 min, 5 min, 10 min and 30 min. You can choose the right
time according to different scenes.
2. You can also customize the timer. In the lower part of the Timer interface, tap the custom
icon. Slide up and down to select the specific countdown time, tap the start icon to start the
countdown timer. Tap the pause icon to pause the countdown time. Tap the stop icon to exit the
countdown timer.
3. The watch will ring and vibrate for 30s when the countdown timer is expires. Tap the
repetition icon to restart the countdown timer. Tap the stop icon to return to the previous
interface.
4. Slide right the screen to exit the timer application.
Notes
Select the default countdown timer and tap it to start the countdown directly.
The timer can run at the back end if you exit it during its operation.
2.9 Stopwatch
1. Tap the Up key to go to the app list, tap Stopwatch, and tap the start icon to start timing.
Tap the pause icon to pause the timing. After pause, tap the stop icon to reset the stopwatch.
Tap the flag icon to count times.
2. Slide right the screen to exit the stopwatch application.
Notes
After starting timing, tap the Down key to count times quickly.
The count is displayed in sequence, and the latest count is displayed on the top, with the
upper limit of 50.
The stopwatch is displayed in the format of “SS:MMM”. If the stopwatch lasts more than
one hour, it is displayed in the format of “HH:MM:SS”.
The stopwatch can run at the back end if you exit it during its operation.
2.10 Flashlight
1. Tap the Up key to go to the app list, select Flashlight, and then the screen is highlighted.
Tap the screen to turn off the flashlight, tap the screen again to turn on the flashlight, slide right
the screen to exit the flashlight application.
On the watch face interface, slide down to open the shortcut menu. Tap Flashlight to quickly
start the flashlight function.
To Next Page
Loading...