Onespace 50-JN02 User Manual

HARDWARE KIT
STOCK # 51-JN02HA
PART
DESCRIPTION
QTY
STOCK NO
3 of 6
REPLACEMENT PARTS
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT.
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED.
THE PART WILL
NORMALLY BE SHIPPED WITHIN 48 HOURS.
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
1
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
51-JN02LB
Laptop
Board
A
1
51-JN02BS
Base
B
1
51-JN02BSP
Bottom Support
C
1
51-JN02TSP
Top Support
D
PART
DESCRIPTION
QTY
STOCK NO
1
51-JN02PA
Pivot Anchor
G
H
PART
DESCRIPTION
QTY
4
1
4
2
4
3
2
4
PARTS AND HARDWARE LIST (50-JN02)
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
1
51-JN02TK
Tilt Knob
2
51-JN02SK
Support Knob
I
2
51-JN02CA
Caster
E
2
51-JN02CAL
Locking Caster
F
J
51-JN02UB 1
U Bracket
M6X30MM
M6X10MM
M6 Nut
Washer
Allen Key
Extra Hardware Pack
(1-4)
5

Onespace 50-JN02 Specifications

General

Brand	Onespace
Model	50-JN02
Category	Indoor Furnishing
Language	English