Onespace 50-JN02 - Assembly Steps; Step 1: Base and Bottom Support Assembly; Step 2: Attaching Pivot Anchor to Laptop Board

4 of 6
ASSEMBLY INSTRUCTION (50-JN02)
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED
STEP 2
Attach the Pivot Anchor (G) to the Laptop Board (A) using two screws (2).
STEP 1
Screw in Locking Casters (F) to the front of Base (B). Screw in non-locking
Casters (E) to the back of Base.
Attach Bottom Support (C) to Base using (1) and (3).
1
2
3
Pcs
Pcs
E
F
Pcs
2
E
F
2
C
B
A
G