Replace the OneTouch
®
UltraSoft
™
Cap. Turn
the cap clockwise until it is snug but not too
tight.
Adjust the puncture depth setting if
necessary. Twist the knob counterclockwise,
toward the smaller bumps for a shallower
puncture. Twist the knob clockwise, toward
the larger bumps for a deeper puncture.
Slide the ejection/cocking control backward
until it clicks. If it does not click, the sampler
may have been cocked when the lancet was
inserted.
Cock the OneTouch
®
UltraSoft™
Blood Sampler
19
DCO_05244004A_OTFT_OB_US 6/30/03 10:38 AM Page 19