OneTouch FASTTAKE - DISPLAY MESSAGES AND PROBLEM-SOLVING GUIDE

DISPLAY MESSAGES AND
PROBLEM-SOLVING GUIDE
Following is a summary of all display messages and symbols. In
the event of a problem, refer to the information under ACTION.
44
MESSAGE WHAT IT MEANS
System check.
Appears upon
insertion of a test
strip or whenever
the meter is turned
on. Verifies that all
segments are
present on the
display.
This message
appears
immediately after
the system check if
your meter has not
been coded.
This is the code
number stored in
the meter.
ACTION
If segments are
missing, call LifeScan
Customer Services
for further action.
Missing segments
can lead to the wrong
interpretation of the
displayed test result.
See “Coding the
Meter,” pages 8–10.
Make sure that this
code number
matches the code
number on the vial
of test strips you are
using.
(Example)
DCO_05244004A_OTFT_OB_US 6/30/03 10:38 AM Page 44