OneTouch Select Plus Flex User Manual

62
3
Taking a test
Sending your results to the app
If the BLUETOOTH
®
feature on the meter is turned on,
indicated by the BLUETOOTH
®
symbol ( ), the meter
will automatically send the latest result to any paired
compatible wireless device. The compatible wireless
device must have the app running and have already been
paired to the meter before sending a result.
NOTE: The compatible wireless device must have the app
open and have already been paired to the meter before
sending a result. See page30.
NOTE: If the BLUETOOTH
®
feature on the meter is turned
off, or the meter is out of range, the result is not sent
to the compatible wireless device. The result is saved in
the meter memory with the current date and time, and
will be sent to the app the next time you sync. The sent
results are also stored in the meter. To sync, the app must
be open and running on your compatible wireless device.

OneTouch Select Plus Flex Specifications

General

Display	LCD
Bluetooth	Yes
Test Time	5 seconds
Measurement Range	20-600 mg/dL
Memory	500 tests
Sample Size	1.0 µL
Operating Conditions	10-90% relative humidity
Battery Type	CR2032