OneTouch Ultra Plus Flex User Manual

50
3
Taking a test
Applying blood and reading results
Applying the sample
1. Apply the sample to the test strip
You can apply blood to either side of the test strip.
Apply your sample to the opening of the channel.
Be sure to apply your sample immediately after you get a
drop of blood.
Holding the meter at a
slight angle, guide the
channel to the blood drop.

OneTouch Ultra Plus Flex Specifications

General

Display Type	LCD
Connectivity	Bluetooth
Test Time	5 seconds
Sample Size	0.4 μL
Measurement Range	20 to 600 mg/dL
Memory	500 tests
Automatic Shutoff	Yes (after 2 minutes of inactivity)
Operating Conditions	10% to 90% RH
Storage Conditions	Humidity: 10 to 90% RH