OneTouch Ultra Plus Flex User Manual

58
3
Taking a test
Removing the used lancet
NOTE: This lancing device has an ejection feature, so you
do not have to pull out the used lancet.
1. Remove the lancing device cap
Remove the cap by turning it
counterclockwise and then
pulling it straight off of the
device.

OneTouch Ultra Plus Flex Specifications

General

Display Type	LCD
Connectivity	Bluetooth
Test Time	5 seconds
Sample Size	0.4 μL
Measurement Range	20 to 600 mg/dL
Memory	500 tests
Automatic Shutoff	Yes (after 2 minutes of inactivity)
Operating Conditions	10% to 90% RH
Storage Conditions	Humidity: 10 to 90% RH