Customer Service 1 800 227-8862 25
Once you have a blood sample and your meter shows the APPLY BLOOD
screen, you are ready to obtain a blood glucose result. If your meter
does not show the APPLY BLOOD screen, remove the unused test strip
and re-start the test process. See page 10.
1. Prepare to apply the sample
The drop of blood should be next to the top edge of the test strip.
Blood should not be applied to the flat face of the test strip.
When applying a drop of blood from your forearm or palm, keep your
palm or forearm steady and bring the top edge of the test strip to the
drop of blood with your other hand.
Applying blood and reading results
Forearm
Fingertip
Palm
DCO_06344502A_OU2_OB_USe.qxd 3/13/07 11:52 AM Page 25
To Next Page
Loading...
