26 Customer Service 1 800 227-8862
2. Apply the sample
Touch and hold the drop of blood to the narrow channel in the top edge
of the test strip. Blood will be drawn into the strip. Keep holding the
drop of blood to the top edge of the test strip until the confirmation
window is full.
NOTE:
• Do not smear or scrape the drop of blood with the test strip.
• Do not press the test strip too firmly against your puncture site.
• Do not apply more blood to the test strip after you have moved
the drop of blood away.
• Do not move the test strip in the meter during a test.
Applying blood and reading results
CAUTION: You may get an ERROR 5 message or an inaccurate result
if the blood sample does not fill the confirmation window completely.
See page 58. Discard the strip and re-start the test process.
DCO_06344502A_OU2_OB_USe.qxd 3/13/07 11:52 AM Page 26
To Next Page
Loading...
