OneTouch UltraEasy - Page 8

5
SETTING THE TIME AND DATE, AND CODING YOUR METER

Set AM or PM
“AM” or “PM” will be displayed next to the minutes. Press ▲ or ▼ to set AM or PM, then
wait ve seconds to move to the next setting. The year (last two digits only), month and day
appear on the display and the year ashes.

Set the year
Press ▲ or ▼ to change the year. When you have the correct year on the display, wait ve
seconds to move to the next setting. The month will now start ashing.

Set the month
Press ▲ or ▼ to change the month. When you have the correct month on the display, wait
ve seconds to move to the next setting. The day will now start ashing.

Set the day
Press ▲ or ▼ to change the day. When you have the correct day on the display, wait ve
seconds to move to the next screen.
Your time and date settings will be displayed for ve seconds. After the ve seconds, the
settings will be saved and the meter will then turn o. If you want to adjust your settings,
press ▲ or ▼ while the time and date are still on the display. You will be returned to the
rst set-up screen where you can begin with the hour.