6
Setting up your system
Step 5
Set the month
Press ▲ or
▼
to change the month. When you have
the correct month on the display, wait five seconds to
move to the next setting.
The day will now start flashing.
Step 6
Set the day
Press ▲ or
▼
to change the day. When you have the
correct day on the display, wait five seconds to move
to the next screen.
Your time and date settings will be displayed for five
seconds. After the five seconds, the settings will be
saved and the meter will then turn off.
If you want to adjust your settings, press ▲ or
▼
while the time and date are still on the display. You
will be returned to the first set-up screen where you
can begin with the hour.
DCO_06397001C_OTUE_OB_GB.qxd 4/13/07 3:18 PM Page 6
To Next Page
Loading...
