Step 2
Set the hour
With the hour flashing on the display, press and release ▲ or
▼
to go forward or backward
one hour. To move faster, hold the ▲ or
▼
buttons down. When the correct hour appears
on the display, wait five seconds. Your entry will be saved and you will move to the next
setting.
The minutes will now start flashing.
Step 3
Set the minutes
Press ▲ or
▼
to change the minutes. When you have
the correct minutes on the display, wait five seconds
to move to the next setting.
The year (last two digits only), month and day appear
on the display and the year flashes.
Step 4
Set the year
Press ▲ or
▼
to change the year. When you have the
correct year on the display, wait five seconds to move to the next setting.
The month will now start flashing.
5
Setting up your system
DCO_06397001C_OTUE_OB_GB.qxd 4/13/07 3:18 PM Page 5
To Next Page
Loading...
