16
REVIEWING PAST RESULTS AND AVERAGES
Averages
The meter will display three types of averages:
• ALL RESULTS AVG to view all test results
• MEAL AVGS to view before- and after-meal results
• FASTING AVG to view fasting results
All results average
If the meal ags feature is o, selecting AVERAGES from the MAIN MENU will lead directly to the ALL RESULTS AVG screen.
For each of the 7, 14 and 30 day periods leading up to the current date, the meter will display the
number of results (NUM) and the average of these results (AVG).
Press to go back to the AVERAGES screen.
To return to the MAIN MENU, highlight MENU, then press .
Meal averages
The meter will display the averages of all before-meal (BFR) and after-meal (AFT) results for each of the
7, 14 and 30 day periods leading up to the current date. This screen is not available when the meal ags
feature is o.
Fasting average
For each of the 7, 14 and 30 day periods leading up to the current date, the meter will display the
number of results (NUM) and the average of these results (AVG). This screen is not available when the
ags feature is o.
• In result averages, a HI result is always counted as 33.3 mmol/L, and a LO result is always counted as
1.1 mmol/L. (See Interpreting unexpected test results in Section 2 for more information on high and
low glucose results.)
• The meter calculates averages based on the 7, 14 and 30 day periods ending on the current date setting. If you change your date
setting, your averages may change too.
• Result averages provide information from past results. Do not use result averages to make immediate treatment decisions.
WARNING: To avoid a possible shock, do not insert a test strip while the meter is connected to a computer.
MENU
AVERAGES
ALL RESULTS AV G
MEAL AV GS
FASTING AVG
MENU
ALL RESULT S AV G
LAST
7 DAYS
14 DAYS
30 DAYS
mmol/L
NUM
17
30
125
AV G
5.9
6.3
6.9
MENU
MEAL AV GS
LAST
7 DAYS
14 DAYS
30 DAYS
mmol/L
BFR
5.9
6.4
6.9
AFT
7.5
7.8
8.4
MENU
FASTING AV G
LAST
7 DAYS
14 DAYS
30 DAYS
mmol/L
NUM
6
21
30
AV G
5.4
5.5
5.6
Downloading results to a computer
You can store and analyse your test results by downloading them from the meter to a computer. For more information, or to obtain the
required software and interface cable, visit www.LifeScan.co.uk or call Customer Care on 0800 121 200 (UK) or 1800 535 676 (Ireland).
Follow the installation instructions provided with the software, then connect the cable and transfer your data.
NOTE: Make sure the meter is turned o when you connect the cable to the meter data port. You will not be able to perform a test while
the meter is downloading data.
To Next Page
Loading...
