15
REVIEWING PAST RESULTS AND AVERAGES
Reviewing past results and averages
Reviewing past results and averages
If your meter is o, press and hold until the meter turns on. If you have just completed a test, press to get to the MAIN MENU.
From the MAIN MENU, choose:
• LAST RESULT to view your most recent result,
• ALL RESULTS to review up to 500 of your most recent results, or
• AVERAGES to select result averages.
Press or
to highlight your selection and press .
Last Result
The meter will display your most recent result.
Press to return to the MAIN MENU.
All Results
The meter will display four results at a time, starting with the most recent.
The following symbols may also appear:
HI if the result was above 33.3 mmol/L
LO if the result was below 1.1 mmol/L
C if the result is from a control solution test
– if the result is agged BEFORE MEAL
+ if the result is agged AFTER MEAL
if the result is agged FASTING
When the meter memory is full, the oldest result is dropped as the newest is added
Press
to move backward and to move forward through your results. Pressing and holding or
allows you to move more
quickly.
To view details of an individual result, press or
to highlight the result, then press . If you wish to add or remove a meal ag
for this result, see Section 3, Attaching meal ags and fasting ags to your test results.
To return to the previous screen, press .
To return to the MAIN MENU, highlight MENU, then press .
METER OFF
MAIN MENU
LAST RESULT
ALL RESULT S
AVERAGES
SETTINGS
11 /OCT/08 09:30
AFTER MEAL
mmol/L
7. 7
�
Flag
Time
Unit of
measure
Date
MENU
ALL RESULT S
11 /OCT
10/OCT
09/OCT
08/OCT
mmol/L
10:01
17:21
07:03
08:33
6.8
HI
5.4
7.7
C
+