OneTouch VitA - Powering on and configuring meter settings

4
SETTING UP YOUR SYSTEM
Checking the meter serial number
You can check your meter serial number at any time.

Go to the SERIAL NUMBER screen
From the MAIN MENU, press or to highlight SETTINGS and press .
Then press or to select SERIAL NUMBER and press .
Your serial number is displayed. Press to return to the MAIN MENU.
Turning your meter o after setup
There are three ways to turn your meter o:
• Press and hold for three seconds,
or,
• Your meter will turn o by itself if left alone for about two minutes,
or,
• From the MAIN MENU, press or to highlight METER OFF, then press .
MENU
SETTINGS
METER SETTINGS
FLAGS
SERIAL NUMBER
SERIAL NUMBER
LAXGL0Q6