// 04-29 GETTING TO KNOW YOUR ONEWHEEL
Onewheel is powered ON and OFF by the pushbutton
switch on the side of the Onewheel. Always make sure
your Onewheel is on the ground in the ready-to-ride
position before switching it “ON.” Always turn your
Onewheel “OFF” when charging, storing or carrying it.
WARNING: Never pick up your Onewheel when the
switch is in the “ON” position since the wheel may
spin causing a safety hazard.
CAUTION: Do not press the rider detect section of
the footpad while powering on your Onewheel or it
will not operate.
TIP: Turning on your Onewheel while it is not on the
ground will cause an error.
MAIN POWER PUSHBUTTON SWITCH
To Next Page
Loading...