To Next PageTo Next PageWhat to do if my Onida S18CFL-G3 unit does not cool?
If your Onida Air Conditioner isn't cooling, ensure that the airflow paths are free from any obstructions. Clear away anything blocking the unit. Also, make sure that you have selected COOL mode and that the selected temperature is lower than the current room temperature. A dirty air filter can also cause this issue, so be sure to clean it.
How to fix an Onida Air Conditioner that does not start?
If your Onida Air Conditioner doesn't start, first check the MCB (Miniature Circuit Breaker). If it has tripped, reset it. Also, inspect the fuse; if it's burnt, replace the fuse wire. Ensure the On/Off key is activated, either on the control panel or via the remote.
General| Capacity | 1.5 Ton |
|---|---|
| Energy Rating | 3 Star |
| Compressor | Rotary |
| Operating Voltage | 230 V |
| Operating Frequency | 50 Hz |
| Condenser Coil | Copper |
| Type | Split AC |
| Refrigerant | R32 |
| Dehumidification Capacity | 1.8 l/h |
| Warranty | 1 Year |
Details key performance aspects like compressor and energy efficiency.
Details the functions and layout of the remote control.
Basic steps to operate the AC using the remote control.
Setting ON and OFF timers for automated operation.
Guidelines for optimal placement of the indoor unit.
Advice on selecting the best location for the outdoor unit.
Steps for mounting the indoor unit on the wall.
Table listing common AC problems and their remedies.
Details the standard 12-month warranty period and exclusions.
Specific warranty terms for the compressor unit.
Conditions that may void the warranty or are not covered.
Lists specific actions or circumstances that invalidate the warranty.
Directory of service center phone numbers by state.
