To Next PageTo Next PageWhat to do if Onida Air Conditioner unit does not cool?
If your Onida Air Conditioner isn't cooling, ensure that the airflow paths are unobstructed. Remove any items blocking the airflow. Also, verify that the unit is set to COOL mode, not fan mode. Make sure your selected temperature is lower than the current room temperature. Lastly, check and clean the air filter.
How to troubleshoot Onida Air Conditioner that does not start?
If your Onida Air Conditioner doesn't start, it could be due to several reasons: * The MCB might have tripped: Reset the MCB. * A fuse may have burnt: Replace the fuse wire. * The input voltage to the stabilizer might be too low: Press the On/Off key. * The On/Off key on the control panel or remote might not be activated: Press the On/Off key.
General| Capacity | 1.5 Ton |
|---|---|
| Energy Rating | 3 Star |
| Compressor | Rotary |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 54 dB |
| Remote Control | Yes |
| Timer | Yes |
| Auto Restart | Yes |
| Refrigerant Leak Detection | Yes |
| Type | Split |
| Operating Temperature Range (Cooling) | 48°C |
| Warranty | 1 Year |
Register your product for warranty via the official website.
Contact the call center for assistance with warranty registration.
Submit warranty card by post or visit a service center for registration.
Details on the visual design and appearance of the indoor unit.
Information on energy efficiency, compressor, and cooling capabilities.
Highlights of special functions like i-Cool, Smart Sleep, and Turbo mode.
Features related to product safety, durability, and long-term performance.
Description of the indoor unit and its main parts.
Description of the outdoor unit and its main parts.
Explanation of how the temperature and other indicators are shown on the indoor unit.
Identification of buttons and their functions on the remote control.
Instructions for inserting batteries into the remote control.
How to turn on/off and start the air conditioner.
Guide on adjusting the temperature settings for desired comfort.
Explanation of how the automatic operating mode functions.
Details on using the air conditioner for cooling.
How to use the dry mode for humidity reduction.
Information on operating the unit in fan-only mode.
Description of the i-Cool function for instant cooling, with/without fan controller.
How to activate turbo mode for powerful cooling.
Details on using the energy-saving Eco mode.
How to control the ceiling fan speed via the remote.
Guide to setting and using personalized operating preferences.
Explanation of the 3-stage smart sleep modes and personal preferences.
How to program the AC to switch ON or OFF at specific times.
Instructions for setting the current time on the remote control.
How to adjust the up/down and left/right louvers for optimal air distribution.
How to operate the AC using the emergency switch when the remote is unavailable.
Recommendations for selecting the best location for the indoor unit.
Advice on choosing an optimal location for the outdoor unit.
Guidance on pipe routing, ODU support, and accessibility for service.
Information regarding the necessary electrical outlet near the indoor unit.
Visual guide showing indoor unit mounting and accessory placement.
Visual guide showing outdoor unit mounting and accessory placement.
Steps for fitting the mounting plate and drilling holes for the indoor unit.
Instructions for connecting the necessary cables to the indoor unit.
How to connect cables between indoor and outdoor units.
Details on pipe diameters, torque, and sealing for installation.
Instructions for adding refrigerant if the connecting pipe length exceeds limits.
Procedures for performing leak tests and initial operation tests.
Simple maintenance jobs the user can perform, like cleaning filters.
Step-by-step guide on how to remove and clean the air filters.
List of advisable actions for optimal use and room comfort.
List of actions to avoid for proper functioning and preventing damage.
Common causes and remedies when the unit fails to start.
Solutions for problems related to the unit not cooling effectively.
Troubleshooting tips for airflow problems and incorrect mode selection.
Details on the standard warranty period and exclusions.
Information on the extended warranty period for the compressor.
Conditions that affect warranty validity, such as unauthorized service or damage.
Company's rights regarding repairs and limitations on liability for damages.
Voltage operating range and the necessity of using a stabilizer.
Specific actions or conditions that will void the product warranty.
A list of service center phone numbers categorized by Indian states.
