To Next PageTo Next PageWhat to do if my Onida Air Conditioner unit does not cool?
If your Onida Air Conditioner isn't cooling, ensure that the airflow paths are free from any obstructions. Clear away anything blocking the unit. Also, make sure that you have selected COOL mode and that the selected temperature is lower than the current room temperature. A dirty air filter can also cause this issue, so be sure to clean it.
How to fix an Onida S12CFL-G3 Air Conditioner that does not start?
If your Onida Air Conditioner doesn't start, first check the MCB (Miniature Circuit Breaker). If it has tripped, reset it. Also, inspect the fuse; if it's burnt, replace the fuse wire. Ensure the On/Off key is activated, either on the control panel or via the remote.
General| Model | S12CFL-G3 |
|---|---|
| Energy Rating | 3 Star |
| Compressor Type | Rotary |
| Refrigerant | R32 |
| Indoor Noise Level | 38 dB |
| Copper Condenser Coil | Yes |
| Anti Dust Filter | Yes |
| Auto Restart | Yes |
| Sleep Mode | Yes |
| Type | Split Air Conditioner |
| Operating Voltage | 230 V |
| Warranty | 1 Year on Product |
Basic steps to turn on, set temp, and turn off the AC.
Explains AUTO, COOL, and DRY operating modes.
How to adjust temperature settings for comfort.
Steps for fitting the mounting plate and drilling holes.
Procedure for connecting internal wiring to the unit.
Final steps for securing the outdoor unit.
Details on connecting liquid and gas pipes for refrigerant flow.
Instructions for adding refrigerant based on pipe length.
Common causes and solutions when the unit doesn't start.
Common causes and solutions for poor cooling.
Specific terms for the compressor's warranty period.
Overall warranty period and exclusions.
Scenarios where the warranty becomes void.
