21
Playing Your iPod/iPhone—Continued
While reading the contents of your iPod/iPhone,
the message “Connecting” appears on the CD
receiver’s display.
“iPod” appears on the display of the CD receiver. If
your iPod/iPhone is not connected properly, “No
Device” appears.
Tip:
• When connecting your iPod/iPhone with a USB cable,
we recommend you use an official USB cable from
Apple Inc.
3
Press the Play/Pause [1/3] button.
Playback starts.
■ Pausing Playback
To pause playback, press the Play/Pause [1/3] button.
Press the Play/Pause [1/3] button again to resume
playback. You can also pause playback by pressing the
[2] button.
■ Selecting Tracks
To return to the beginning of the track that’s currently
playing or paused, press the Previous [7] button.
Press the Previous [7] button repeatedly to select
earlier tracks.
Press the Next [6] button repeatedly to select
subsequent tracks.
■ Fast-Forward or Fast-Reverse
During playback, press and hold the Fast Forward [4]
button to fast forward, or the Fast Reverse [5] button
to fast reverse.
■ Random Playback
Press the [SHUFFLE] button repeatedly to switch the
random function of your iPod/iPhone.
■ Repeat Playback
Press the [REPEAT] button repeatedly to switch the
repeat function of your iPod/iPhone.
■ Selecting Playlist
Press the PLAYLIST [q]/[w] button to select the
playlist.
1
Press the remote controller’s [MENU]
button to display the iPod menu.
2
Use the remote controller’s arrow [q]/[w]/
[e]/[r] buttons to select an item on the
menu, and then press the [ENTER] button.
Note:
• The volume level is adjusted by using the VOLUME
[–]/[+] buttons on the CD receiver or its remote
controller. Adjusting the volume on your iPod/iPhone
has no effect.
• Depending on your iPod/iPhone, some functions may
not work as expected.
Controlling Your iPod/iPhone
Navigating the iPod Menus with the
Remote Controller
To Next Page
Loading...
