113
"Direct Transfer". (Supported devices:
DAC-HA300, XPA-700)
Direct transfer output frequency
maximum
Set the upper limit for frequency when
"Direct Transfer" is selected in "DSD
Output Format". Select the frequency that
your connected USB device can process.
Auto/2.8 MHz/5.6 MHz/11.2 MHz
DoP Pause Operation
When you select "Output DSD Zero", you
can reduce the reoccurrence of noise
when DoP is paused by outputting a muted
DSD signal for a maximum of 10 minutes
even while sound is not being output.
Stop Output/Output DSD Zero
Output DSD 3/6 MHz via DoP
Outputs DSD format music files as DoP
format. When the setting is canceled, even
if DoP is selected in "DSD Output Format",
only DSD 3 MHz and 6 MHz are
automatically converted to PCM.