61
∫ Removing the micro SD card
Unmount the micro SD card using the following
procedure before removing it. The card can be
damaged or may stop working properly if you fail
to unmount the card first.
1 Tap "Settings" in the home screen.
2 Tap in "Storage & USB" - "SD card".
3 Turn off this unit, then insert the slot tray
ejector pin and into the small hole in the slot
tray to open it.
4 Push the micro SD card in until you hear a
click and then pull straight out. The micro SD
card will spring out so take care not to lose it.
5 Push the slot tray straight in horizontally to
close it.
To Next Page
Loading...
Need help?
General