Onkyo DS-A2X User Manual

11
Using the RI Dock—Continued
When the OSD mode is set to On, you can
change the background color and set the
screen saver.
1. Press the [MENU] button repeatedly to
select the top menu.
2. Use the Up and Down arrow [ ]/[ ] but-
tons to select “Settings,” and then press the
[SELECT] button.
3. Use the Up and Down arrow [ ]/[ ] but-
tons to select Background Color or Screen
Saver, and then press the [SELECT] button.
4. Use the Up and Down arrow [ ]/[ ] but-
tons to select an option, and then press the
[SELECT] button.
■ Background Color
You can change the background color of the
onscreen display on your TV to any one of the
following eight colors: None (black), Blue1,
Blue2, Green1, Green2, Magenta, Red1, or
Red2.
■ Screen Saver
You can set the time at which the screen saver is
activated to any one of the following four
options: 1 minute, 5 minutes, 10 minutes, or Off
(screen saver off).
When the screen saver activates, the onscreen
display on your TV disappears. Press any button
on the remote controller to cancel the screen
saver and resume the onscreen display.
While the OSD mode is set to On, you can set
the RI Dock’s video output to PAL or NTSC.
If the onscreen display looks distorted on your
TV, try changing the TV system.
•While pressing and holding down the
[SETUP] button, press the VOLUME Up [ ]
button for more than 3 seconds to select
NTSC, or press the VOLUME Down [ ] but-
ton for more than 3 seconds to select PAL.
■ Functions
Depending on your amp, you may also be able
to use the following functions.
•System On Function
When you turn on your amp, the iPod turns on
as well. With some amps, you may need to
press the [ON] button on your amp’s remote
controller’s twice to turn on the other compo-
nents in your system.
•System Off Function
When you turn off your amp, the iPod turns off
as well.
•Auto Power On Function
*
If you start iPod playback while your amp is on
Standby, your amp will automatically turn on
and select your iPod as the input source. Then,
your iPod will start playback.
•Direct Change Function
*
If you start iPod playback while listening to
another input source, your amp will automati-
cally select your iPod as the input source.
•Timer Play
You can use your amp’s Timer function to turn
on your amp and iPod and start playback at a
specified time.
• Linked Dimmer Operation
When you use your amp’s Dimmer function to
change its display’s brightness, the brightness
of the RI Dock’s Power indicator will change as
well.
•Using Your Amp’s Remote Controller
You can use your amp’s remote controller to
control basic iPod functions (see page 13).
TV Display Settings
Setting the TV System
Other Functions
* If you use your iPod’s controls to start an iPod slideshow or
video, these functions will not work, so use the remote con-
troller instead.
Note:
•Your amp may take several seconds to
startup, so you might not hear the first
few seconds of the first song.

Onkyo DS-A2X Specifications

Power

power supply	AC adaptor (5 V DC)
power consumption	1.1 W (iPod not inserted)

Package Dimensions

carton dimensions	207 x 340 x 76 mm
carton weight	1.1 kg

Weight and Dimensions

dimensions	112 x 60 x 112 mm
weight	230 g