Onkyo DV CP704 Service Manual

53 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

DV-CP704

SERVICE MANUAL

SERVICE MANUAL

DVD CHANGER

Black and Silver models

MODEL DV-CP704

120V AC, 60Hz

100-240V AC, 50/60Hz

BCDD, SCDD

BCUA, SCUA

Ref. No. 3952

082006

RC-655DV

SAFETY-RELATED COMPONENT

WARNING!!

COMPONENTS IDENTIFIED BY MARK ON THE

SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE

CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.

REPLACE THESE COMPONENTS WITH ONKYO

PARTS WHOSE PART NUMBERS APPEAR AS SHOWN

IN THIS MANUAL.

MAKE LEAKAGE-CURRENT OR RESISTANCE

MEASUREMENTS TO DETERMINE THAT EXPOSED

PARTS ARE ACCEPTABLY INSULATED FROM THE

SUPPLY CIRCUIT BEFORE RETURNING THE

APPLIANCE TO THE CUSTOMER.

Other manuals for Onkyo DV CP704

Instruction Manual52 pages

Questions and Answers:

M
Megan LoweJul 26, 2025
Why remote control not working for Onkyo DV CP704 CD Player?
- A
  April HallJul 26, 2025
  If the buttons on your Onkyo CD Player (DV-CP704) are working but the remote controller isn't, there are several things to check. First, make sure the batteries in the remote are not flat and are installed correctly. Next, ensure you're pointing the remote directly at the DV-CP704's remote sensor and that you're not too far away (the remote has a range of about 16 feet or 5 meters). Finally, check for any strong light sources, like direct sunlight or inverter-type fluorescent lights, that might be interfering with the remote sensor. If necessary, relocate the unit.
K
Kathryn RodriguezJul 31, 2025
What to do if the disc is dirty in Onkyo DV CP704?
- B
  Brandon MathewsJul 31, 2025
  Remove the disc and clean it.
B
Brian PatrickAug 10, 2025
What to do if there is no picture from Onkyo DV CP704 CD Player?
- C
  christopher20Aug 10, 2025
  If you're not getting a picture from your Onkyo CD Player (DV-CP704), here's what you can do: * Ensure your TV is set to the correct input for the DV-CP704. * Check that the video cables are properly connected. * If using HDMI, make sure the HDMI Output Setting isn't set to Off by pressing the [RESOLUTION] button on the remote. If your TV doesn't support progressive scanning and the HDMI OUT is on, press and hold the [RESOLUTION] button to turn off the HDMI OUT. Also, if the HDMI Resolution isn't set to 480p (480p/576p), try pressing the [RESOLUTION] button repeatedly to change it. If you're using component video output while HDMI OUT is on, turn off HDMI OUT and set the progressive Setting on the onscreen setup menus to Interlaced.
D
Diane BeckAug 14, 2025
How to fix Onkyo CD Player when it can't start playback?
- T
  Todd RyanAug 14, 2025
  If your Onkyo CD Player (DV-CP704) is not playing, make sure the disc is clean. Also, ensure that discs are loaded into the player. Check that you're using compatible discs and that they are loaded right-side up and centered in the disc bay.
B
Bryan SanchezAug 20, 2025
Why is there no digital audio output from my Onkyo CD Player?
- S
  Scott FloresAug 20, 2025
  If you're not getting any digital audio output from your Onkyo CD Player (DV-CP704), verify that the Digital/HDMI Audio Out setting isn't set to Off; change it to either All or PCM. Also, if your TV or AV receiver doesn't support Dolby Digital, change the Digital/HDMI Audio Out setting to PCM. If your TV or AV receiver doesn't support DTS, the DV-CP704 won't be able to play DTS format audio; select a different audio format on your DVD-Video disc's audio setup menu. If your TV or AV receiver doesn't support 96 kHz PCM, change the Linear PCM Out setting to Down Sample On.

Onkyo DV CP704 Specifications

Operating Environment

Operating temperature	5° to 35° C (41° F to 95° F)

Power

Power supply (U.S. model)	120 V AC, 60 Hz
Power supply (Australian model)	100–240 V AC, 50/60 Hz
Power consumption	13 W
Power consumption in Standby mode (U.S. model)	0.35 W
Power consumption in Standby mode (Australian model)	0.35 W

Audio Specifications

Signal-to-noise ratio	95 dB
Audio dynamic range	95 dB
Total harmonic distortion	0.007% (1 kHz)
Wow and flutter	Below threshold of measurability

Video Outputs

Component video Y	1.0 V (p–p), 75 Ω, negative sync, RCA/phono x3
Component video PB/PR	0.7 V (p–p), 75 Ω
S VIDEO Y	0.7 V (p–p), 75 Ω, negative sync, 4-pin mini DIN x1
S VIDEO C	0.286 V (p–p), 75 Ω
Composite video	1.0 V (p–p), 75 Ω, negative sync, RCA/phono x1

Audio Outputs

Optical output	–22.5 dBm, optical connector x1
Coaxial output	0.5 V (p–p), 75 Ω, RCA/phono x1
Analog output	2.0 V (rms), 540 Ω, RCA/phono x2
HDMI output	19 pin connector

Weight and Dimensions

Weight	5.5 kg (12.1 lbs.)
Dimensions (W x H x D)	435 X 91 X 432 mm (17-1/8 X 3-9/16 X 17 ins.)

Related product manuals

Preview: Onkyo DV-CP706

Preview: Onkyo DV-CP702

Onkyo DV-SP503E

Preview: Onkyo DX-C201

Preview: Onkyo DX-C606

Preview: Onkyo DX-C370

Preview: Onkyo DX-C330

Preview: Onkyo DX-7355

Preview: Onkyo DX-7711