K
katiemorrisAug 19, 2025
How to select the correct input source on my receiver for my Onkyo DV-CP706?
- JJessica YoungAug 20, 2025
Select the input on your hi-fi amp or AV receiver to which the DV-CP706 is connected.
To Next PageTo Next PageHow to select the correct input source on my receiver for my Onkyo DV-CP706?
Select the input on your hi-fi amp or AV receiver to which the DV-CP706 is connected.
Why won't my Onkyo CD Player read the disc?
Make sure you load the disc the correct way up.
What to do if my Onkyo CD Player DV-CP706 won't turn on?
First, turn off the DV-CP706, wait five seconds, and then try turning it on again. If that doesn’t work, disconnect the power cord from the wall outlet, wait 10 seconds, reconnect it, and then try turning it on again.
Why is my Onkyo CD Player not showing on TV?
Make sure you have selected the correct input on your TV to which the DV-CP706 is connected.
What to do if my Onkyo CD Player has no sound?
Ensure that the hi-fi amp or AV receiver connected to the DV-CP706’s audio outputs is turned on.
How to turn on HDMI output on Onkyo DV-CP706 CD Player?
Try pressing the [RESOLUTION] button on the remote controller repeatedly to switch the HDMI OUT on.
What to do if the disc is not centered in the Onkyo CD Player?
Place the disc in the center of the disc bay.
How do I enable Digital/HDMI Audio Out on my Onkyo CD Player?
Change the Digital/HDMI Audio Out setting to either All or PCM.
How to play Dolby Digital on Onkyo DV-CP706 CD Player with incompatible receiver?
Change the Digital/HDMI Audio Out setting to PCM.
What to do if Onkyo CD Player is affected by power fluctuations?
Turn off the DV-CP706, wait five seconds, then turn it on again. If that doesn’t resolve the issue, disconnect the power cord from the wall outlet, wait five seconds, reconnect it, then try again.
General