Onkyo GXW-5.1 User Manual

Covers reading instructions, cleaning, water, servicing, overloading, and heat precautions.

Ensures safe installation, ventilation, power source, outdoor antenna grounding, and avoiding power lines.

Addresses grounding, polarization, cord protection, lightning surges, and replacement parts.

Details on warranty claims and recording copyrighted material.

Information on the AC fuse and proper cleaning methods for the unit.

Specific warnings and notes for U.S./Canadian models, FCC compliance, and memory backup.

Guidance on using speakers near TVs/computers and avoiding abnormal signals.

Highlights built-in decoders, surround sound formats, and unique J'drive subwoofer technology.

Details the integrated design, total power output, and individual amplifier wattages.

Lists all accessories included with the GXW-5.1 system for setup and operation.

Instructions for inserting and handling batteries for the remote controller.

Guidance on aiming the remote and ensuring proper signal reception.

Identifies and explains the functions of buttons and indicators on the front panel.

Details the meaning of indicators on the display panel (A, B, C).

Details the POWER switch, power cord, and front/surround speaker terminals.

Explains the optical, coaxial, and line input jacks for connecting audio sources.

Explains buttons for selecting input sources and adjusting volume.

Details buttons like LATE NIGHT, DIMMER, DISTANCE, TEST, and LISTENING MODE.

Describes optimal placement for front, center, surround speakers, and subwoofer for surround sound.

Instructions for mounting satellite speakers using M5 screws and hardware.

Recommendations for using cork spacers for better speaker stability and sound quality.

Illustrates how to connect audio/game devices using digital and analog inputs.

Guidance on connecting game devices, DVD players, and computers for audio output.

Advice on connecting stereo audio cables and avoiding interference with other cables.

Steps for stripping and preparing speaker wires for connection to terminals.

Instructions on how to insert speaker wires into terminals and secure them.

Visual guide showing how to connect front, center, and surround speakers to the unit.

Ensures all connections are made before plugging in the power cord.

Steps to turn on the unit using the rear power switch and front standby button.

Explains the built-in system that preserves settings during power interruptions.

Procedure for dealing with unit malfunctions by unplugging and replugging the power cord.

Steps to set the distance between speakers and listening position using the remote.

Clarifies limitations and options for setting center and surround speaker distances.

Uses a test tone to adjust each speaker's output level for balanced sound.

Instructions to adjust individual speaker volume levels using the remote control.

Repeatedly press INPUT to cycle through DIG1, DIG2, and ANALOG sources.

Instructions to start playback and adjust volume after selecting the input source.

Explains how digital inputs are prioritized and when to use LINE INPUT.

How to use the MUTING button to temporarily silence audio output.

Steps to change the brightness of the unit's display panel.

Explains DOLBY DIGITAL Surround and DTS formats for 5.1-channel theater-like sound.

Details the advanced 5.1-channel format with Movie and Music modes.

Introduces unique modes like GAME ACT, POPS/ROCK, MUSICAL, and TV FAN.

Important information regarding potential noise and connection issues with DTS sources.

How to select the desired input source and then cycle through listening modes.

Instructions to start playback and revert to STEREO listening mode.

Deciphers the meaning of channel indicators (a, b, c) on the display panel.

How to temporarily adjust individual speaker levels for optimal sound balance.

Explains how to use the Late Night function to narrow dynamic range for low-volume listening.

Addresses problems like power shutting off immediately or no power.

Solutions for units with power but no sound, or unresponsive remote controllers.

Procedure to reset GXW-5.1 settings to factory defaults using specific button presses.

Detailed technical specs for amplifier output, frequency response, and speaker types.

Covers power supply, dimensions, weight, and magnetic shielding details.