To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-R550 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| HDMI Outputs | 1 |
| Dolby Digital | Yes |
| DTS | Yes |
| 4K Pass-through | No |
| HDR Support | No |
| Dolby Atmos | No |
| DTS:X | No |
| Bluetooth | No |
| Wi-Fi | No |
| USB Port | No |
| Coaxial Input | 1 |
| Phono Input | No |
| Speaker Impedance | 6 Ohms |
Conditions requiring professional servicing for damage to the unit.
Guidelines to prevent objects and liquids from entering the apparatus.
Environmental considerations and local regulations for battery disposal.
Proper ventilation requirements for installing the apparatus in built-in locations.
Information regarding copyright for personal use recordings.
Details about the AC fuse and when to contact service personnel.
Guidelines for cleaning and maintaining the unit's finish and lettering.
Important safety notes for connecting the power cord and voltage requirements.
Important notes on handling, usage, and potential operational issues.
FCC information for US models and compliance for Canadian models.
Guidelines for placing speakers to avoid temperature, humidity, and vibration damage.
Advice on speaker placement near magnetic devices like TVs and computers.
Warning about specific input signals that can cause speaker coil damage.
Information on using speaker sets A and B for different listening room setups.
Connecting speakers and AV components to the AV receiver.
Steps for powering on the AV receiver and its components.
Essential initial settings for optimal system performance.
How to enjoy movies and music with your system.
How to select and utilize various sound modes.
Description of the AV receiver's front panel controls, buttons, and indicators.
Explanation of the various indicators shown on the AV receiver's display.
Description of the AV receiver's rear panel input and output jacks.
Instructions for opening the compartment and inserting batteries.
Guidance on proper aiming and operational range for reliable remote control.
How to select and use different operating modes for controlling components.
Buttons used for controlling the tuner when the TUNER input is selected.
Buttons used for controlling a tape deck when the TAPE input is selected.
How to use the remote controller to operate a DVD player.
How to use the remote controller for CD, MD, CDR, or Dock components.
Information on the subwoofer's front/rear connections, indicators, and power switch.
Step-by-step instructions for removing and attaching speaker grilles.
Guidance on positioning front, center, surround, and subwoofer speakers.
Essential precautions for connecting speakers, including polarity and impedance.
Detailed instructions for connecting speaker set A, including color coding.
How to use the supplied tool for tightening speaker terminals.
Instructions for connecting speaker set B, sold separately.
Instructions for securely wall-mounting speakers using provided brackets.
Instructions for connecting the supplied indoor FM antenna.
Instructions for connecting the supplied indoor AM loop antenna.
Guidance on connecting outdoor FM and AM antennas for better reception.
How to use an antenna splitter to prevent interference issues.
General advice and precautions for making AV connections.
Information and precautions for using optical digital audio jacks.
Explanation of color coding for RCA-type audio and video connections.
Description of various video and audio cables and their corresponding jacks.
Guidance on selecting the best connection formats for your components.
Detailed instructions for connecting a TV or projector to the AV receiver.
Detailed instructions for connecting a DVD player to the AV receiver.
Connecting DVD players with multichannel analog audio output.
Instructions for connecting components using HDMI cables.
Instructions for connecting VCR or DVD recorders for playback.
Instructions for connecting VCR or DVD recorders for recording.
Instructions for connecting camcorders, game consoles, or other devices.
Instructions for connecting satellite/cable receivers or set-top boxes.
Instructions for connecting CD players and turntables to the AV receiver.
Instructions for connecting an RI Dock for remote interactive functions.
Instructions for connecting tape recorders, CDRs, MiniDiscs, or DAT recorders.
Instructions for connecting Onkyo components via RI for interactive control.
Instructions for connecting the AV receiver's power cord to a wall outlet.
Step-by-step guide to powering the AV receiver on and putting it into standby mode.
Key initial setup steps for ensuring smooth operation of the AV receiver.
Guide to automatic speaker calibration using the setup microphone.
Explanation of the three measurement points for optimal speaker calibration.
Step-by-step instructions for performing the Audyssey automatic speaker setup.
Explanation of common error messages that may appear during automatic speaker setup.
Instructions for manually adjusting speaker settings if auto-setup is unsuccessful.
Tips for setting up a powered subwoofer when using automatic speaker setup.
Assigning HDMI inputs to specific input selectors on the AV receiver.
Assigning digital audio inputs to specific input selectors.
Modifying input display settings for RI-capable components.
Fundamental operations like selecting sources, adjusting volume, and speaker sets.
Connecting and utilizing multichannel audio sources like DVD-Audio.
How to view information about the current input source and signal format.
Understanding the meaning of surround channel information indicators.
Basic steps for selecting and listening to AM and FM radio stations.
Methods for tuning radio stations using Auto or Manual modes.
Setting AM frequency steps based on regional requirements.
Tips for improving reception of weak FM stereo stations by using mono mode.
How to tune into radio stations directly by entering their frequency.
Storing, selecting, and deleting favorite AM/FM radio stations as presets.
How to adjust the bass and treble for the front speakers.
Temporarily silencing the AV receiver's audio output.
How to adjust the brightness of the AV receiver's display.
Setting the AV receiver to turn off automatically after a specified period.
Connecting and using headphones for private listening.
Adjusting the volume levels for individual speakers.
Methods for choosing listening modes via the remote controller or receiver.
Table showing available listening modes for different input signal formats.
Detailed explanations of various listening modes like Stereo, Mono, Dolby, and DTS.
Adjusting soundtrack brightness for movie viewing.
Reducing dynamic range for late-night listening with Dolby Digital material.
Adjusting various audio parameters for speaker set A.
Determining channel output from stereo multiplex or mono sources.
Settings for Pro Logic II/IIx Music mode for 2-channel sources.
Specifying front channel attenuation for DTS Neo:6 Music mode.
Determining how Dolby Digital EX signals are handled.
Specifying front speaker angles for Theater-Dimensional listening mode.
Adjusting subwoofer sensitivity for multichannel DVD input.
How to record from a selected input source to a component.
Recording audio and video from different sources simultaneously.
Manually configuring speaker size, configuration, and crossover frequencies.
Specifying connected speakers and their sizes for optimal setup.
Setting up surround and surround back speaker configuration and channels.
Setting appropriate crossover frequencies based on speaker size.
Boosting bass output by feeding bass sounds to the subwoofer.
Manually setting speaker distances from the listening position.
Adjusting the volume levels for individual speakers for balanced output.
Adjusting the tone (frequency response) for individual speakers.
Specifying digital input formats like PCM and DTS for optimal signal detection.
Adjusting audio delay to synchronize with video for progressive scan sources.
How to program the remote controller to operate other AV components.
Specific remote control codes for Onkyo components connected via RI.
How to reset individual REMOTE MODE buttons to their default codes.
How to reset the entire remote controller to its default settings.
Instructions on using the remote controller to operate a TV.
Instructions on using the remote controller to operate a VCR.
Instructions on using the remote controller to operate a satellite/cable receiver.
Solutions for problems related to the AV receiver not turning on or turning off.
Solutions for problems with sound output, quietness, or missing channels.
Troubleshooting for multichannel DVD input and video signal problems.
Solutions for radio reception problems and remote controller malfunctions.
Troubleshooting for recording problems, headphone sound changes, and RI functions.
Information about the AV receiver's battery-less memory backup system.
Technical specifications for the AV receiver's amplifier, video, and tuner sections.
Detailed specifications for the powered subwoofer, center, front, and surround speakers.
