To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-R667 and is the answer not in the manual?
General| Weight | 23.81 lbs |
|---|---|
| Signal-To-Noise Ratio | 100 dB |
| THD | 0.08 % |
| Input Sensitivity | 200 mV |
| HDMI Switching | Yes |
| Audio D/A Converter | 192kHz / 24-bit |
| HDMI Pass-Through | Yes |
| Digital Sound Processor (DSP) | Yes |
| Tuner Bands | AM/FM |
| Preset Station Qty | 40 |
| Bluetooth | No |
| Wi-Fi | No |
| Response Bandwidth | 10 Hz - 100 kHz |
| Input Impedance | 47 kΩ |
| Output Power / Channel | 100 W (6 ohms, 1 kHz, 1% THD, 1 channel driven) |
| Frequency Response | 10 Hz - 100 kHz |
| Video Inputs | Composite, Component |
| Video Outputs | Composite, Component, HDMI |
| Audio Inputs | Optical, Coaxial, Analog Audio |
| Audio Outputs | Subwoofer x 1 |
Explains how to use two sets of speakers for different listening rooms.
Lists key specifications and technologies of the amplifier section.
Identifies and explains the functions of the AV receiver's front panel controls.
Details the various input and output jacks on the rear panel.
Describes the powered subwoofer and its connections.
Details the front, center, and surround speakers and their mounting options.
Details speaker setup based on the number of speakers used.
Step-by-step guide for connecting a TV or projector.
Guide for connecting a DVD player for audio and video.
Explains HDMI interface, supported formats, and copyright protection.
Procedure for powering the AV receiver on and off.
Initial setup steps for configuring the AV receiver.
Explains how Audyssey 2EQ calibrates speakers and room acoustics.
Covers selecting input sources, controlling speakers, and adjusting volume.
Manual configuration of speaker settings like size, distance, and levels.
Solutions for issues like not turning on or shutting off unexpectedly.
Troubleshooting steps for no sound or quiet sound issues.
