Onkyo HT-R390 User Manual

AV Receiver
HT-R390
HT-R290
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction ...................................2
Connections.................................10
Turning On & Basic Operations ......17
Advanced Operations .................27
Controlling Other Components ...38
Appendix......................................44
E n

Onkyo HT-R390 Specifications

General

Channels	5.1
Signal-to-Noise Ratio	100 dB (Line, IHF-A)
Speaker Impedance	6 ohms
HDMI Inputs	4
HDMI Outputs	1
Optical Inputs	2
Coaxial Inputs	1
USB Port	No
Bluetooth	No
Power Output	100 W per channel (6 ohms, 1 kHz, 1% THD)
Frequency Response	20 Hz–50 kHz
Input Sensitivity	200mV
Dolby Support	Dolby TrueHD, Dolby Digital Plus
DTS Support	DTS-HD Master Audio