To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-S5300 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Total Power Output | 1000W |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Speaker Configuration | 5.1 |
| Subwoofer | 10-inch powered subwoofer |
| Dimensions (Receiver) | 17.1 x 12.5 x 6.5 inches |
| Weight (Receiver) | 22.0 lbs |
| Total Harmonic Distortion | 0.08% |
| Type | Home Theater System |
| Bluetooth | No |
| Wi-Fi | No |
| Dolby Digital | Yes |
| DTS | Yes |
| 4K Pass-through | Yes |
| HDCP 2.2 Support | Yes |
| Speakers | 5 |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
Guidelines for speaker placement to ensure optimal performance and prevent damage.
Advice on speaker placement near TVs and computer monitors to avoid picture distortion.
Alerts about signal types that can damage speaker coils or cause wire breakage.
Identifies and explains the buttons and indicators on the AV receiver's front panel.
Information on the subwoofer's features, connections, and indicators.
Details on the various speaker types included in the package and their connections.
Explains how to use the remote to operate the AV receiver's functions.
Instructions for using the remote to tune AM/FM radio stations.
Overview of how the system enhances the home theater experience with surround sound.
Guidance on optimal positioning of front speakers for sound imaging.
Instructions for placing the center speaker for dialogue clarity and full sound.
Recommendations for positioning surround speakers for ambience and localization.
Guidance on placing surround back speakers for enhanced realism and localization.
Advice on positioning optional front high speakers for spatial experience.
Tips for placing the subwoofer to achieve optimal bass output.
Explains how to connect speakers based on channel configuration.
Details on selecting speaker sizes and types for optimal performance.
Important warnings and advice before connecting speaker cables.
How to use rubber stoppers for better speaker stability and sound.
Guidance on using floor pads to protect flooring from the subwoofer.
Visual guide showing component connection setups for video and audio.
Explains various AV signal types, cables, and their corresponding jacks.
Explains the ARC function for sending audio back to the receiver via HDMI.
Instructions on how to set up for video recording.
Steps for connecting and utilizing Onkyo components via RI (Remote Interactive).
Explains different video connection options like composite, component, and HDMI.
Details audio connection options such as analog, optical, coaxial, and HDMI.
Step-by-step guide on how to power on the AV receiver.
Instructions for safely powering off the AV receiver and entering standby mode.
How to select input sources and play audio/video from connected devices.
How to view details about the current input source and its format.
How to activate the Music Optimizer for enhanced compressed music playback.
Instructions for adjusting the brightness of the AV receiver's display.
How to set the receiver to automatically turn off after a specified time.
Instructions for connecting and using headphones with the receiver.
How to configure input selector names for RI-capable components.
How to prioritize front high or surround back speakers.
Introduction to using the built-in AM/FM tuner and storing favorite stations.
Methods for tuning into radio stations: auto, manual, and by frequency.
Procedure for automatically scanning and tuning to radio stations.
Procedure for manually tuning radio stations by adjusting frequency.
How to directly tune into AM/FM stations by entering the frequency.
How to select stored radio stations using presets.
Steps to remove unwanted stored radio stations.
Explanation of the Radio Data System and its features for FM radio.
How to search for radio stations based on program type.
How to find and listen to stations broadcasting traffic information.
How to connect external recording devices to the receiver.
Guide to recording audio from one source and video from another simultaneously.
Instructions for recording audio and video signals to a recorder.
How to choose different sound modes for movies, music, and games.
Explains the function of dedicated listening mode buttons on the remote.
Lists the audio formats supported by different listening modes.
Illustrates speaker activation for various channel configurations.
Outputs audio without processing, preserving original sound.
Outputs sound from front left and right speakers and subwoofer.
For PCM multichannel audio sources.
Expands 2-channel sources for a natural surround experience.
Enhances spatial experience using front high speakers.
Expands 5.1-channel sources for 6.1/7.1 playback with a back surround channel.
Outputs audio without surround processing, enabling various settings.
Handles DTS audio formats, enabling various processing and settings.
Expands 2-channel sources for 7.1-channel playback.
Simulates natural reverberation for classical and operatic music.
Emphasizes front stereo image for acoustic music and vocals.
Creates a lively sound field for rock and pop music.
Fills listening area with stereo sound from all speakers for background music.
Overview of the on-screen menus for configuring receiver settings.
General steps for navigating and making settings within the setup menus.
How to assign HDMI inputs to input selectors for video components.
How to assign component video inputs to input selectors.
How to assign digital audio inputs to input selectors.
Specifies connected speakers and their sizes (Small/Large).
Sets the crossover frequency for speakers designated as 'Small'.
Specifies the distance from each speaker to the listening position for accurate sound arrival.
Adjusts speaker levels using a test tone for balanced output.
Allows adjustment of sound settings like bass, treble, and multiplex/mono options.
Enables or disables Audyssey EQ and related features.
Adjusts frequency response for consistent sound quality at any volume.
Configures settings for DTS Neo:6 listening modes.
Offsets the reference level for movies and music based on dynamic range.
Manages volume variations between programs and commercials.
Optimizes the Theater-Dimensional mode by specifying speaker angles.
Assigns custom names to input selectors for easy identification.
Contains settings related to speaker impedance and Zone 2/front high speaker options.
Allows changing the receiver's remote ID for multi-component setups.
Sets the correct FM/AM tuning frequency steps for your region.
Determines if HDMI audio is output to the TV speakers.
Enables automatic correction of audio/video delay for HDMI connections.
Enables system control of RIHHD-compatible components via HDMI.
Configures the ARC function for sending TV audio back to the receiver.
Enables or disables power control for linked HDMI components.
Enables control of the AV receiver from an RIHHD-compatible TV.
Adjusts bass and treble levels for the front speakers.
Temporarily adjusts the volume for each individual speaker.
Softens overly bright movie soundtracks for home theater reproduction.
Sets priorities of audio output when both digital and analog inputs are present.
Corrects audio/video sync issues by delaying audio signals.
Manually sets signal format to PCM or DTS if auto-detection fails.
Explains the two methods for connecting Zone 2 speakers.
Setup for 5.1ch main room playback and 2ch stereo playback in Zone 2.
Setup for 7.1ch main room playback and 2ch stereo playback in Zone 2 via external amp.
How to turn Zone 2 on/off, select sources, and adjust volume.
Steps to turn on Zone 2, select input source, and adjust volume using the receiver.
How to adjust the volume for Zone 2 using the remote controller or receiver.
How to mute and unmute audio output for Zone 2.
Instructions for connecting an Onkyo dock to the AV receiver for iPod control.
Details on using the UP-A1 Dock to play iPod music, photos, and movies.
How to operate the iPod using the AV receiver's remote controller.
How to use the iPod's alarm clock function to automatically turn on the receiver.
Information on messages displayed when checking iPod dock connection.
Information regarding the RI Dock for controlling iPod features.
Instructions for controlling iPod functions with the remote controller.
Table detailing available remote control buttons for iPod operation.
Lists preprogrammed remote control codes for common AV components.
Steps to enter remote control codes for controlling other components.
Codes for controlling Onkyo components connected via RI for system control.
Restores default remote control codes for specific REMOTE MODE buttons.
Resets the remote controller to its original factory default settings.
Addresses protection circuit activation and troubleshooting steps.
Solutions for no sound, quiet sound, or incorrect audio formats.
Steps to resolve the AV receiver not turning on.
Solutions for specific speaker sound problems (center, surround, subwoofer, front high).
Troubleshooting no picture or unclear video from components.
Ensures on-screen menus appear correctly on the TV.
Addresses noisy reception or lack of FM stereo signal.
Solutions for when the remote controller is not working.
Resolves issues with unexpected iPod source selection or connectivity.
Troubleshooting recording failures and Zone 2 audio problems.
Technical details on amplifier power output, sensitivity, and frequency response.
Information on power supply, dimensions, weight, and basic connectivity.
Details on HDMI interface, supported formats, and features.
Lists types and assignments for all video and audio input/output jacks.
Technical details for the AM/FM tuner.
Technical specifications for the subwoofer component.
Technical specifications for the center speaker component.
Technical specs for surround and surround back speakers.
Technical specifications for the front speaker components.
Technical details for the iPod dock.
Lists the audio formats supported over HDMI connections.
Explains HDCP copy protection for digital video signals.
Lists components compatible with the RIHD system control via HDMI.
Details system control operations possible with RIHD-compatible devices.
Step-by-step guide for connecting HDMI components and confirming settings.
Instructions for operating connected components using the remote controller.
