To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-S780 and is the answer not in the manual?
General| AM/FM Tuner | Yes |
|---|---|
| Receiver Type | AV Receiver |
| Coaxial Audio Input | 1 |
| Supported Audio Formats | Dolby Atmos, Dolby TrueHD, DTS-HD Master Audio, DTS:X |
| Bluetooth | Yes |
| Speaker Configuration | 5.1 |
| USB Port | Yes |
| Speaker Configuration Details | Front Left/Right, Center, Surround Left/Right, Subwoofer |
Critical safety notices to prevent fire, electric shock, and injury to persons.
Explanation of the battery-less system for retaining settings when unplugged.
Regulatory information and compliance details for U.S. models.
Detailed overview of buttons, indicators, and ports on the front of the AV receiver.
Explanation of the various indicators and information shown on the AV receiver's display screen.
Identification and explanation of the input/output jacks and connectors on the rear of the AV receiver.
Description of the front and rear panel controls and indicators of the powered subwoofer.
Instructions on how to remove and install speaker grilles for the front and center speakers.
Explanation of the remote's operating modes and general usage principles.
How to set the remote to control the AV receiver and its basic operation.
Detailed explanation of the functions of each button on the AV receiver's remote control.
Instructions for operating a DVD player using the remote controller.
Instructions for operating CD, MD, or CDR players using the remote controller.
Instructions for controlling an Onkyo cassette recorder via RI using the remote.
How to use dedicated buttons on the remote to control a TV.
Step-by-step guide on how to install batteries in the remote controller.
Guidelines and tips for effective use of the remote controller with the AV receiver.
Guidance on speaker placement for optimal surround sound experience.
Crucial advice regarding speaker wiring polarity, impedance, and cable selection.
Step-by-step guide for connecting Speaker Set A, including terminal color coding.
Instructions for connecting an optional second set of speakers.
How to assemble and connect the supplied indoor AM loop antenna.
How to connect the supplied indoor FM antenna for optimal reception.
Advice on using a commercially available outdoor FM antenna when indoor reception is poor.
Guidance on connecting an outdoor AM antenna for improved reception.
Information on using a splitter to share an antenna for both TV and FM signals.
General advice and precautions before making any AV connections to the system.
Explanation of how to use and connect optical digital audio cables.
Guide to color-coded RCA jacks and cables for audio and video connections.
Description and usage of various video and audio cables and their corresponding jacks.
How to connect both audio and video signals simultaneously for component selection.
Guidance on choosing the appropriate connection formats based on component capabilities.
Overview of available video connection types: composite, S-Video, and component.
Overview of available audio connection types: analog, optical, coaxial, and multichannel.
Step-by-step instructions for connecting a TV or projector for video and audio.
Detailed guide for connecting a DVD player, covering both video and audio connections for various modes.
Instructions for connecting a VCR/DVD recorder for playback, including audio and video.
Steps for connecting a VCR/DVD recorder to enable recording functionality.
How to connect auxiliary devices like camcorders or game consoles via composite video and analog audio.
Instructions for connecting satellite receivers, cable boxes, and other video sources.
Guide for connecting CD players and turntables, including those with built-in phono preamps.
How to connect various recorders like cassette decks, CDR, and MiniDisc players.
Information on using the AV receiver's switched AC outlet to power other components.
How to connect and utilize Onkyo components with RI (Remote Interactive) functionality.
General advice on connecting power cords for safety and preventing surge issues.
Quick setup steps for initial configuration to ensure smooth operation.
Procedure to test if all speakers are connected and functioning correctly using a test tone.
How to configure digital audio inputs to correspond with specific input sources for Dolby Digital/DTS.
How to change the display setting for Onkyo recorders connected via RI for proper functionality.
Fundamental steps for operating the AV receiver, including source selection, speaker output, volume, and subwoofer levels.
How to view information about the current input source, signal format, and listening mode.
Instructions for connecting and using components with multichannel analog audio outputs.
Methods for tuning stations, including Auto Tuning and Manual Tuning modes.
Setting the AM frequency step based on regional standards.
Guide on how to store favorite radio stations as presets for quick access.
How to remove stored radio presets from the tuner's memory.
How to recall and listen to stored radio presets using the remote or front panel.
How to modify the bass and treble levels for the front speakers to adjust sound characteristics.
How to temporarily silence the audio output of the AV receiver.
Activating the OR-EQ function to optimize sound performance, especially with included speakers.
Setting the AV receiver to automatically turn off after a specified period.
How to connect and use headphones for private listening, including mode limitations.
Adjusting the volume level of individual speakers for balanced surround sound.
Methods for choosing listening modes via the AV receiver or remote controller.
Specific buttons on the remote used for selecting listening modes like Stereo and Surround.
Controls on the AV receiver's front panel for selecting listening modes.
Table showing which listening modes are compatible with different input signal formats (Analog, PCM, Dolby D, DTS).
Detailed descriptions of various listening modes like Direct, Stereo, Mono, Dolby Pro Logic II, Dolby Digital, and DTS.
Description of DTS-ES Matrix and Neo:6 modes for enhanced surround playback.
Overview of proprietary DSP modes like Mono Movie, Orchestra, Studio-Mix, etc.
How to use the CinemaFILTER to soften bright movie soundtracks.
Accessing and using various audio adjustment functions for sound tuning.
How to use the Late Night function to reduce dynamic range for quiet listening.
Settings for multiplex and mono sources, determining output channels or languages.
Specific settings for Pro Logic II and IIx Music modes like Panorama and Dimension.
Adjusting the Center Image setting for the DTS Neo:6 Music mode.
Configuring how Dolby Digital EX signals are handled based on source content.
Adjustments related to speaker configuration, crossover, and double bass settings.
How to measure and input speaker distances for proper time alignment in surround sound.
Procedure for adjusting individual speaker volume levels using test tones for balanced output.
How to specify connected speakers, their sizes (Small/Large), and subwoofer presence.
Setting for surround back speakers, specifying their size and connection (2ch/1ch).
How to set the crossover frequency for speakers and subwoofer based on size and performance.
Activating the Double Bass function to reinforce bass by routing low frequencies to the subwoofer.
Table showing display indicators for signal formats and how to manually set them (PCM, DTS, Auto).
Steps for recording from selected input sources to connected AV components via TAPE OUT/VIDEO 1 OUT.
How to record audio from one source while watching video from another, for overdubbing.
Procedure for programming the remote controller with codes for other manufacturer's components.
Specific remote control codes for Onkyo components connected via RI for remote operation.
How to reset a REMOTE MODE button to its default factory settings.
Procedure to reset the entire remote controller to its original factory default settings.
How to control a TV using the remote controller after programming the correct mode.
How to control a VCR using the remote controller after programming the correct mode.
How to control a satellite or cable receiver using the remote controller.
Troubleshooting steps for issues related to powering on the AV receiver or it turning off unexpectedly.
Solutions for no sound, low volume, or incorrect speaker output issues.
Steps to diagnose and fix issues where the subwoofer is not producing sound.
Troubleshooting for problems with speaker set B not producing sound, likely related to analog connections.
Solutions for sound issues related to specific digital audio signal formats like PCM or DTS.
Reasons why 6.1 or 7.1 channel playback might not be achievable.
Troubleshooting tips for when the remote controller is not working correctly or cannot control other components.
Steps to resolve issues when the remote cannot operate connected external devices.
Troubleshooting common problems encountered during recording operations.
Solutions for miscellaneous issues like sound changes with headphones or display problems.
Detailed technical specifications for the main AV receiver unit.
Power output, distortion, and video input/output specs for the amplifier.
Specifications for FM and AM tuner sections, including sensitivity, signal-to-noise ratio, and THD.
General overview of speaker specifications.
