Onkyo HT-S5200

Press the SPEAKERS [A] button on the front panel.
Make sure that speaker indicator A is shown on the
display.
Press the [RECEIVER] button, and then press the
remote controller’s [SP A/B] button repeatedly to
select speaker set A.
Make sure that speaker indicator A is shown on the
display.
Turn off speaker set B when not in use. Indicator
should be off.
On the
front panel
On the
remote
controller
On the
display
BA
First of all, turn on speaker set A.
Front
Left
Surround
Left
Surround
Back
Left
Surround
Back
Right
Surround
Right
Listener
TV
Sub woofer
Front
Right
Center
Front
Left
Surround
Left
Surround
Back
Left
Surround
Back
Right
Surround
Right
Listener
TV
Front
Right
Center
Sub woofer
Speaker Set A Layout (Main Room)
Surround right
speaker
Surround back
right speaker
Surround back
left speaker
Surround
left speaker
Powered
subwoofer
Front left
speaker
Front right
speaker
Center speaker
SN 29344936(C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved.
Speaker Hookup
Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting speakers
and AV components (DVD player, TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,please see the
Instruction Manual.
QUICK SETUP
Model : HT-S5200
* 2 9 3 4 4 9 3 6 *
See the other side of this sheet
for the AV component hookup.
HTP-570 speaker package is shown

Onkyo HT-S5200 Specifications

General

Brand	Onkyo
Model	HT-S5200
Category	Speakers
Language	English

Summary

Quick Setup Overview

Speaker Hookup Guide

Diagram and instructions for connecting speakers to the AV receiver.

Initial Speaker Activation

Steps to turn on speaker set A and confirm its status on the display.

Speaker Set A Layout

Visual representation of the main room speaker set A connections.

AV Component Connection Guide

HDMI Component Connections

Connecting TV and players via HDMI for pass-through of audio and video signals.

Non-HDMI Component Connections

Connecting devices using analog or digital audio/video methods when HDMI is not used.

Digital Input Assignment

Procedure for assigning digital inputs for audio sources if sound is not present.

UP-A1 L Port Connector Setup

Instructions for connecting the supplied UP-A1L accessory to the port connector.