To Next PageTo Next PageWhat to do if my Onkyo Speakers power is not turned on?
First, make sure that the AC power cord of the sound bar is properly plugged in. If it is, the protection circuit may be activated. Unplug the AC power cord and plug it back in after 5 minutes or more to reset it.
What to do if when a button is pressed, the Onkyo sound bar does not respond?
Set the sound bar to the standby mode and then turn it back on. If the sound bar still malfunctions, reset it.
Why is there no sound coming from my Onkyo SBT-200?
There might be several reasons why you are not getting any sound. First, check if the input signal is set correctly, as DTS and AAC signals may not be supported. Also, verify that the volume level is not set to “Min(0”, and that muting is not activated. Ensure that all connections are correctly made. If you are using Bluetooth, confirm that the sound bar is not too far from the Bluetooth enabled devices and is properly paired with them.
Why does my Onkyo SBT-200 Speakers remote controller not operate properly?
Check the following: ensure the battery polarity is correct and that the battery is not dead (replace it if necessary). Make sure the distance and angle to the sound bar are correct and there are no obstacles blocking the signal. Also, strong light (like inverter-type fluorescent lights or direct sunshine) shining on the remote sensor may interfere with the signal. Finally, check if you are using the remote controller for another equipment simultaneously.
How to fix Bluetooth sound that is interrupted or distorted on Onkyo SBT-200?
Make sure the sound bar is not too near a device that generates electromagnetic radiation. Check if there are any obstacles between the sound bar and the Bluetooth enabled device.
What to do if my Onkyo sound bar cannot be turned on with the remote controller?
Ensure that the AC power cord of the sound bar is plugged in and that the battery is inserted in the remote controller.
What to do if my Onkyo SBT-200 produce noise during playback?
Try moving the sound bar away from any computers or mobile phones. Also, ensure the audio cable is correctly connected to the input jack of the sound bar. If the issue persists, the noise may be due to deterioration over time. Confirm the model year of your TV, DVD, or Blu-ray Disc player.
General safety instructions for operation and maintenance.
Specific warnings related to the supplied AC/DC adapter.
Explanation of buttons and functions on the remote controller.
Detailed instructions and precautions for mounting the soundbar on a wall.
Safety measures to prevent falling during rack/table or wall placement.
Detailed steps for connecting audio output from TVs and players.
How to use sound modes, surround function, and select input sources.
Steps and methods for pairing Bluetooth devices, including NFC.
General
